Radio Spares De-Luxe replica coming soon.
Moderator: VelvetGeorge
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Radio Spares De-Luxe replica coming soon.
I've been keeping this under my hat until I knew there would be an absolutely world class output to offer.
Finally, thanks to a recently available type of steel and detailed first hand specs. There will be a new Metroamp transformer coming out soon.
No actual ETA yet. But I'll keep you posted.
george
Finally, thanks to a recently available type of steel and detailed first hand specs. There will be a new Metroamp transformer coming out soon.
No actual ETA yet. But I'll keep you posted.
george
- Guitar Adjuster
- Senior Member
- Posts: 1560
- Joined: Mon Oct 31, 2005 8:34 pm
- Location: San Antonio
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
-
- New Member
- Posts: 26
- Joined: Thu Sep 09, 2004 3:28 am
- Contact:
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
The specs are from the original Radio Spares De-Luxe output.
Multiple primaries:
6.6k, 8k, 9k and also ultra linear taps.
Multiple secondaries can be wired for output impedance.
There is a unique stack and silly amount of interleaving. Which makes it only doable by hand. So it's an expensive OT to produce.
George
Multiple primaries:
6.6k, 8k, 9k and also ultra linear taps.
Multiple secondaries can be wired for output impedance.
There is a unique stack and silly amount of interleaving. Which makes it only doable by hand. So it's an expensive OT to produce.
George
- Flames1950
- Senior Member
- Posts: 9294
- Joined: Sun Feb 08, 2004 1:04 am
- Location: Waukee, Iowa
- Brian Wallace
- Supporting Advertiser
- Posts: 873
- Joined: Thu Mar 03, 2005 10:45 pm
- Just the numbers in order: 7
- Location: Michigan
- Contact:
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
- Brian Wallace
- Supporting Advertiser
- Posts: 873
- Joined: Thu Mar 03, 2005 10:45 pm
- Just the numbers in order: 7
- Location: Michigan
- Contact:
Steel
Hey George,
Yes, Phil has mentioned the steel. I use the M6 right now for mine. I think an A/B comparison is in order. Hmmmmmmmmmmm
I'll get you some readings in the next couple of days.
Yes, Phil has mentioned the steel. I use the M6 right now for mine. I think an A/B comparison is in order. Hmmmmmmmmmmm
I'll get you some readings in the next couple of days.

- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
- Brian Wallace
- Supporting Advertiser
- Posts: 873
- Joined: Thu Mar 03, 2005 10:45 pm
- Just the numbers in order: 7
- Location: Michigan
- Contact:
-
- Senior Member
- Posts: 5056
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
I suppose this new tranny can handle a misload like the old ones and like germino's heyboer RS tranny? The bluesbreaker combo amps only had a 16 ohm output, but the speaker load was actually 8 ohms. This results in a thicker, more distorted sound than if you use a 16ohm load according to germino.
Last edited by Roe on Wed Jun 21, 2006 9:49 am, edited 1 time in total.
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39