Zero Loss FX Loop Toggle
Moderator: VelvetGeorge
-
Brad H
- New Member
- Posts: 49
- Joined: Tue Jun 20, 2017 7:02 pm
- Just the numbers in order: 13492
Zero Loss FX Loop Toggle
Has anyone removed the level switch from the loop board and replaced with a toggle that mounts on the chassis? I’d like to try this so the chassis doesn’t have to be removed to switch from pedals to rack effects. If anyone has done it, please share how!
-
Brad H
- New Member
- Posts: 49
- Joined: Tue Jun 20, 2017 7:02 pm
- Just the numbers in order: 13492
Re: Zero Loss FX Loop Toggle
Okay, so I suppose a more specific question would be...when replacing the onboard line level switch with an externally mounted toggle, do I jumper the two sides together like on the in/bypass toggle?
-
axeman
- Senior Member
- Posts: 2465
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: Zero Loss FX Loop Toggle
I can't remember, but I can open my 68 and look on Thursday.
-
Brad H
- New Member
- Posts: 49
- Joined: Tue Jun 20, 2017 7:02 pm
- Just the numbers in order: 13492
Re: Zero Loss FX Loop Toggle
I want to say yes, because technically the original cts 206-211 is a dpst switch. So the dpdt switch would be jumpered on lugs 5-6 to work like dpst. But I’d sure like to know for sure!! I can’t get answer from anyone, like it’s top secret or something!