Just wondering if it is possible to have a single input and still have fun jumping the channels?
Thinking it could be put onto a couple of switches maybe?
I found the older thread, but it has lost it's attachments during the change over to the new forum host/server.
Single input two volume controls JTM45/Plexi
-
- Senior Member
- Posts: 101
- Joined: Tue Mar 31, 2009 5:52 pm
- Just the numbers in order: 7
- Location: Aotearoa New Zealand
Single input two volume controls JTM45/Plexi
Some of my toonz. http://soundcloud.com/sets" onclick="window.open(this.href);return false;
My stuff; two strats, one with Van Zants, the other with Fralins. A Jazz bass. One PRS McCathy gold top.
My stuff; two strats, one with Van Zants, the other with Fralins. A Jazz bass. One PRS McCathy gold top.
-
- Senior Member
- Posts: 240
- Joined: Thu Nov 27, 2008 10:39 pm
- Location: Central Mass.
Re: Single input two volume controls JTM45/Plexi
You sure can. I have a diagram somewhere, using one switch for three positions. I'll try to find it and post it for you.
-
- Senior Member
- Posts: 101
- Joined: Tue Mar 31, 2009 5:52 pm
- Just the numbers in order: 7
- Location: Aotearoa New Zealand
Re: Single input two volume controls JTM45/Plexi
That would be awesome!!
Some of my toonz. http://soundcloud.com/sets" onclick="window.open(this.href);return false;
My stuff; two strats, one with Van Zants, the other with Fralins. A Jazz bass. One PRS McCathy gold top.
My stuff; two strats, one with Van Zants, the other with Fralins. A Jazz bass. One PRS McCathy gold top.
-
- New Member
- Posts: 31
- Joined: Tue Nov 08, 2011 3:28 am
- Just the numbers in order: 7
Re: Single input two volume controls JTM45/Plexi
Wire the input to both channels. Then use a three-way on-off-switch to mute each channel at the wiper of the volume pot. Center position (no mute) will be both channels.
Another option is to use a two-pole on-on-on switch where each pole connects/disconnects the volume wiper to/from the mix resistor. Center will have both channels connected.
Another option is to use a two-pole on-on-on switch where each pole connects/disconnects the volume wiper to/from the mix resistor. Center will have both channels connected.
-
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: Single input two volume controls JTM45/Plexi
some just wire the input to both grids and then just adjust the two vols to get the desired mix.
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39