.........

For all things to build the brown sound

Moderators: VelvetGeorge, RACKSYSTEMS

Post Reply
EJSLPlexi
Senior Member
Posts: 894
Joined: Fri Aug 24, 2012 4:44 pm
Just the numbers in order: 7

.........

Post by EJSLPlexi » Sat May 18, 2013 6:48 pm

....
Last edited by EJSLPlexi on Sun May 19, 2013 2:37 pm, edited 3 times in total.

stef
Senior Member
Posts: 1407
Joined: Fri Mar 12, 2010 9:05 pm
Just the numbers in order: 7

Re: Union jack?

Post by stef » Sat May 18, 2013 9:19 pm

:palm: it is a mod5 ripoff

User avatar
Tone Slinger
Senior Member
Posts: 6520
Joined: Thu Aug 24, 2006 10:31 am

Re: Union jack?

Post by Tone Slinger » Sat May 18, 2013 10:55 pm

Thats the sound of a Lar/Mar ppimv set low, v1 cascade or not. It does have that Mod5 voice though doesnt it. Good call Stef :thumbsup: .
Rip Ben Wise (StuntDouble) & Mark Abrahamian (Rockstah)

bognermatchless
New Member
Posts: 39
Joined: Sat Mar 09, 2013 10:41 pm
Just the numbers in order: 13492

Re: Union jack?

Post by bognermatchless » Sun May 19, 2013 12:12 am

Sounds good, if the price is right I'm sure it would do for a lot of people on a budget shooting for VH.

User avatar
rgorke
Senior Member
Posts: 4509
Joined: Fri Feb 08, 2008 11:37 am
Just the numbers in order: 13492
Location: Drought Ravaged SoCal

Re: Union jack?

Post by rgorke » Sun May 19, 2013 9:27 am

It isn't too bad but doesn't have the sag or warmth that Mark used to get. That being said, my days of PPIMV are over (said in Gny. Sgt. Hartman voice).
"If you make a mistake, do it twice and smile and let people think you meant it." Jan Van Halen.

bognermatchless
New Member
Posts: 39
Joined: Sat Mar 09, 2013 10:41 pm
Just the numbers in order: 13492

Re: Union jack?

Post by bognermatchless » Sun May 19, 2013 11:00 am

Why do you dislike the ppimv?

Isn't it out of the circuit when it's on 10?

User avatar
Strat78
Senior Member
Posts: 3093
Joined: Fri Aug 03, 2007 12:38 pm
Just the numbers in order: 13492
Location: though I'm standing still, I'm in a moving place.

Re: Union jack?

Post by Strat78 » Sun May 19, 2013 12:48 pm

WTF, this is not TGP. :(

User avatar
rgorke
Senior Member
Posts: 4509
Joined: Fri Feb 08, 2008 11:37 am
Just the numbers in order: 13492
Location: Drought Ravaged SoCal

Re: Union jack?

Post by rgorke » Sun May 19, 2013 2:08 pm

bognermatchless wrote:Why do you dislike the ppimv?

Isn't it out of the circuit when it's on 10?

You would think so, but no.
"If you make a mistake, do it twice and smile and let people think you meant it." Jan Van Halen.

julkke
Senior Member
Posts: 675
Joined: Mon Mar 19, 2012 1:07 pm
Just the numbers in order: 13492
Location: Finland

Re: Union jack?

Post by julkke » Sun May 19, 2013 2:21 pm

rgorke wrote:
bognermatchless wrote:Why do you dislike the ppimv?

Isn't it out of the circuit when it's on 10?

You would think so, but no.
Lar/Mar is, maybe someone can say they can hear a difference but electrically when dimed it is like if the amp was stock.

stef
Senior Member
Posts: 1407
Joined: Fri Mar 12, 2010 9:05 pm
Just the numbers in order: 7

Re: Union jack?

Post by stef » Sun May 19, 2013 9:58 pm

julkke wrote:
rgorke wrote:
bognermatchless wrote:Why do you dislike the ppimv?

Isn't it out of the circuit when it's on 10?

You would think so, but no.
Lar/Mar is, maybe someone can say they can hear a difference but electrically when dimed it is like if the amp was stock.
:scratch: yeah, the same logic and theory goes for the VolumeI bypass cap, but George demonstrated the difference w/ and w/o the cap. Theoretically there's no difference but in real life you can hear it (just one bypassed cap) and in this case (PPIMV) we have more components and shielded wires involved :what:

User avatar
Tone Slinger
Senior Member
Posts: 6520
Joined: Thu Aug 24, 2006 10:31 am

Re: .........

Post by Tone Slinger » Mon May 20, 2013 12:38 am

That amp wasnt that bad.
Rip Ben Wise (StuntDouble) & Mark Abrahamian (Rockstah)

julkke
Senior Member
Posts: 675
Joined: Mon Mar 19, 2012 1:07 pm
Just the numbers in order: 13492
Location: Finland

Re: Union jack?

Post by julkke » Mon May 20, 2013 7:30 am

stef wrote:
:scratch: yeah, the same logic and theory goes for the VolumeI bypass cap, but George demonstrated the difference w/ and w/o the cap. Theoretically there's no difference but in real life you can hear it (just one bypassed cap) and in this case (PPIMV) we have more components and shielded wires involved :what:

Well, let's say that Lar/Mar doesn't make or break anybodys tone.

User avatar
rgorke
Senior Member
Posts: 4509
Joined: Fri Feb 08, 2008 11:37 am
Just the numbers in order: 13492
Location: Drought Ravaged SoCal

Re: Union jack?

Post by rgorke » Mon May 20, 2013 7:59 am

julkke wrote:
stef wrote:
:scratch: yeah, the same logic and theory goes for the VolumeI bypass cap, but George demonstrated the difference w/ and w/o the cap. Theoretically there's no difference but in real life you can hear it (just one bypassed cap) and in this case (PPIMV) we have more components and shielded wires involved :what:

Well, let's say that Lar/Mar doesn't make or break anybodys tone.

True, but it really had an impact by messing with the NFB. But the tone is much better getting the power tubes saturating. And as stef said and VG also showed, there is something there. Now would you hear it if you weren't A/B ing the amp on the fly? Maybe, maybe not.
"If you make a mistake, do it twice and smile and let people think you meant it." Jan Van Halen.

stef
Senior Member
Posts: 1407
Joined: Fri Mar 12, 2010 9:05 pm
Just the numbers in order: 7

Re: Union jack?

Post by stef » Mon May 20, 2013 12:39 pm

julkke wrote:
stef wrote:
:scratch: yeah, the same logic and theory goes for the VolumeI bypass cap, but George demonstrated the difference w/ and w/o the cap. Theoretically there's no difference but in real life you can hear it (just one bypassed cap) and in this case (PPIMV) we have more components and shielded wires involved :what:

Well, let's say that Lar/Mar doesn't make or break anybodys tone.
But it does, more or less like any other potentiometer (ie tone control) in this circuit. :wink:

Post Reply