Hello guys !
after a year and a half collecting parts, receiving some great help from so many members here and out of here, i want to thank Billy Batz, Karlis, Brian Wallace, Shakti, Neikeel, Sparky, Steve marshall, Parkhead, and every others involved.
i'd like to start this thread with the parts i've collected, because i'd have to make some choices. Not all parts are present on the pictures. If you have some advices, please ! feel free.
JTM 45/100 - Build story
Moderator: VelvetGeorge
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
JTM 45/100 - Build story
- Attachments
-
- IMG_8275l.jpg
- (397.83 KiB) Downloaded 2354 times
-
- IMG_8288l.jpg
- (475.42 KiB) Downloaded 2354 times
-
- IMG_8285l.jpg
- (446.56 KiB) Downloaded 2354 times
Last edited by Xplorer on Fri Jul 13, 2012 7:55 pm, edited 1 time in total.
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
The caps
- Attachments
-
- IMG_0774l.jpg
- (367.31 KiB) Downloaded 2353 times
-
- IMG_0778l.jpg
- (371.19 KiB) Downloaded 2353 times
-
- IMG_0779l.jpg
- (235.68 KiB) Downloaded 2353 times
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
more caps
- Attachments
-
- IMG_0784l.jpg
- (441.71 KiB) Downloaded 2348 times
-
- IMG_0783l.jpg
- (397.16 KiB) Downloaded 2348 times
-
- IMG_0781l.jpg
- (246.25 KiB) Downloaded 2348 times
-
BoogieEngineer
- Senior Member
- Posts: 227
- Joined: Sat Jun 30, 2012 1:53 am
- Just the numbers in order: 13492
- Location: La Jolla, CA
Re: JTM 45/100 - Build story
Very nice dude. I'm building one of those, still at the stage of gathering parts. I have not even found a chassis and you're building two of those. Send me half of the parts will ya 
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
silver micas resistors and diodes
- Attachments
-
- IMG_0792l.jpg
- (347.83 KiB) Downloaded 2346 times
-
- IMG_0785l.jpg
- (368.84 KiB) Downloaded 2346 times
-
- IMG_0791l.jpg
- (423.62 KiB) Downloaded 2346 times
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
Switchs - Scott knobs - light indicators - Plugs - Selectors - Fuse holders - selector
- Attachments
-
- IMG_0788l.jpg
- (288.31 KiB) Downloaded 2346 times
-
- IMG_0789l.jpg
- (334.56 KiB) Downloaded 2346 times
-
- IMG_0795l.jpg
- (332.88 KiB) Downloaded 2346 times
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
Wirewound resistors - metal oxyde resistors - Cliff jacks
- Attachments
-
- IMG_0793l.jpg
- (219.4 KiB) Downloaded 2344 times
-
- IMG_0794l.jpg
- (262.27 KiB) Downloaded 2344 times
-
- IMG_8297l.jpg
- (339.19 KiB) Downloaded 2344 times
-
BoogieEngineer
- Senior Member
- Posts: 227
- Joined: Sat Jun 30, 2012 1:53 am
- Just the numbers in order: 13492
- Location: La Jolla, CA
Re: JTM 45/100 - Build story
Where did you get the chassis?
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
NOS preamp tubes - Shuegang KT66 - Mesh holders - Tube sockets - Pink wire - Mounting screws - tranformer mounting plate - Original RS perforated paxolin boards - Harwin turrets - Turret skating tool
- Attachments
-
- IMG_0800l.jpg
- (332.17 KiB) Downloaded 2343 times
-
- IMG_0799l.jpg
- (377.17 KiB) Downloaded 2343 times
-
- IMG_0798l.jpg
- (400.25 KiB) Downloaded 2343 times
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
My Stock of piher resistors - other Mullard mustard sets - iskra set - tubes - parts - Front plate for JTM45 - JTM Blackflag - Super amplifier rear plates - Super 100 decals -
- Attachments
-
- IMG_8304l2.jpg
- (465.44 KiB) Downloaded 2340 times
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
More later, a list, etc. good night !
still a few parts on the way incuding original RS turrets, another modern selector etc.
i'll start this build with the modern selectors and plug, and transfer all this into another chassis or simply build my second JTM 45/100 with vintage selectors etc, and leave this one this way, or not.
ha ha. patience, this is the word. the chassis come from Brian Wallace.BoogieEngineer wrote:Very nice dude. I'm building one of those, still at the stage of gathering parts. I have not even found a chassis and you're building two of those. Send me half of the parts will ya
still a few parts on the way incuding original RS turrets, another modern selector etc.
i'll start this build with the modern selectors and plug, and transfer all this into another chassis or simply build my second JTM 45/100 with vintage selectors etc, and leave this one this way, or not.
-
axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: JTM 45/100 - Build story
Wow, nice parts collection. Can you tell me were I can buy the AC sockets?
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
the main bulgin plug ? on ebay i think.
-
BoogieEngineer
- Senior Member
- Posts: 227
- Joined: Sat Jun 30, 2012 1:53 am
- Just the numbers in order: 13492
- Location: La Jolla, CA
Re: JTM 45/100 - Build story
And where did you get the blue resistors for power tube sockets? Is that 1R 2W or 1W? 5% tolerance from the look I guess?
-
Xplorer
- Senior Member
- Posts: 2477
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: JTM 45/100 - Build story
i think that i've got it from valvestorm, not sure. i don't remember the values, i'll have to look for it and list everything.