67 and '68 era 100 watt parts list

Post by **VelvetGeorge** » Tue Aug 23, 2005 10:01 pm

This should be pretty complete. Let me know if you guys see anything I missed.

Update: I have added the early '68 12 series 100 watt parts list.

George

Post by **VelvetGeorge** » Tue Aug 23, 2005 10:24 pm

I'm pretty sure I included everything. There are items that you can choose what you want to use, like tube sockets, tubes, transformers ect.

Everything on the list is in the store except the flat lip head case and the boards. I'll work on getting those listed tomorrow. I'm just out of steam tonight.

George

Ricky Lee · Post by **Ricky Lee** » Tue Aug 23, 2005 11:32 pm

George, go to bed! Thanks for posting the list.

Guest · Post by **Guest** » Wed Aug 24, 2005 7:38 am

George,
We all love your dedication! Thanks for the parts list.

Brian

Ralle 500 · Post by **Ralle 500** » Thu Aug 25, 2005 12:32 am

Just one thing... I couldn't find the 0.1uf PI coupling caps... Part from that, excellent work, George

Flames1950 · Post by **Flames1950** » Thu Aug 25, 2005 12:39 am

Ralle 500 wrote:Just one thing... I couldn't find the 0.1uf PI coupling caps... Part from that, excellent work, George

No, it says (4) .1uF's and (5) .022uF's........all on the same line.

Ricky Lee · Post by **Ricky Lee** » Thu Aug 25, 2005 10:35 am

VelvetGeorge wrote:I'm pretty sure I included everything. There are items that you can choose what you want to use, like tube sockets, tubes, transformers ect.

Everything on the list is in the store except the flat lip head case and the boards. I'll work on getting those listed tomorrow. I'm just out of steam tonight.

George

Shouldn't there also be (2) 820ohm 2 watt metal Oxide resistors listed on the parts list as well?

Post by **VelvetGeorge** » Thu Aug 25, 2005 12:01 pm

Yes. Either 2w MO or 1/2 NOS which are long enough to fit across the board.

George

Ralle 500 · Post by **Ralle 500** » Thu Aug 25, 2005 2:37 pm

Flames1950 wrote:
Ralle 500 wrote:Just one thing... I couldn't find the 0.1uf PI coupling caps... Part from that, excellent work, George
No, it says (4) .1uF's and (5) .022uF's........all on the same line.

See... I told you I need new glasses...

Ricky Lee · Post by **Ricky Lee** » Thu Aug 25, 2005 6:55 pm

Ralle, you been looking at to much EVH parts, you need a break!

NY Chief · Post by **NY Chief** » Thu Jun 01, 2006 3:39 pm

Hey, George (Dan, Andy?) can you post a 45/100 parts list? I planned on doing the '67 from the bare bones kit but since I have <ahem> come across 45/100 panels I think I'll need to do that instead!

45auto · Post by **45auto** » Thu Jun 15, 2006 5:46 pm

excuse me if i'm spacing out here i'm new to 100's! is there really:
(quantity) (3) single 32 cap & (1) clamp ???
(i'm trying to get the parts together for my 12k! thanks guys

Flames1950 · Post by **Flames1950** » Thu Jun 15, 2006 6:01 pm

45auto wrote:excuse me if i'm spacing out here i'm new to 100's! is there really:
(quantity) (3) single 32 cap & (1) clamp ???
(i'm trying to get the parts together for my 12k! thanks guys

Yes......two of the 32uF caps are mounted on a turret board under the chassis along with the two 100uF caps. The other 32uF mounts above the chassis with a clamp (make sure you get the single 32 can type for this one!!)

NY Chief · Post by **NY Chief** » Thu Jun 15, 2006 6:35 pm

Andy, if use a JTM45 component board with the 7 32u cap board I've got the 45/100 circuit correct? (Of course with the correct tranny's and choke.)

Which choke did you wind up leaving in yours?

Flames1950 · Post by **Flames1950** » Thu Jun 15, 2006 10:56 pm

I think so....I can't think of much that's different between the two main boards, although sometimes the JTM45/100 had one extra turret in the corner by the bias circuit for the junction of the choke and filter cap wires. My Super PA has it, my first clone doesn't........

TH
he first clone still has a Heyboer 10H 100mA choke. The Super PA has Brian Wallace's 20H RS clone, which I'm still waiting to hear.......if I hook up the fuse holder, Bulgin socket and pilot light I'll have to undo them when the faceplates are done.

But I'm getting damn itchy to hear it........