AA763

Completed amps from Fender, Orange, Hiwatt, Vox, etc.

Moderator: VelvetGeorge

Post Reply
marshman
Senior Member
Posts: 124
Joined: Tue Feb 21, 2006 2:23 pm
Location: SE PA

AA763

Post by marshman » Tue Mar 07, 2006 9:36 pm

So, I'm a big SRV fan, and I'd love to buld myself a Vibroverb. I already have a nice, old 15"JBL from the late 70s, but it's only a 25 watt/16 ohm unit, so I"m looking to use a dual 6V6 power section. Sort of like a Vibro preamp on a Deluxe Reverb power amp.

Except that it would appear that that IS a Deluxe Reverb. Or so it would seem.

Just how many amps used this AA/AB 763 design? DR? Vibroverb? Any others? Supers? Twins?
42

User avatar
Flames1950
Senior Member
Posts: 9294
Joined: Sun Feb 08, 2004 1:04 am
Location: Waukee, Iowa

Post by Flames1950 » Tue Mar 07, 2006 11:23 pm

Most of the Fender lineup had a 7/63 revision. And most are pretty similar.

I'd rethink the concept of two-6V6's for SRV tone though. They just aren't going to stay big and clean. To my ears they compare favorably as a low-wattage, more British sounding American tube. And they may go with that JBL in a fantastic way, I just don't think in an SRV way......
Image

marshman
Senior Member
Posts: 124
Joined: Tue Feb 21, 2006 2:23 pm
Location: SE PA

Post by marshman » Tue Mar 07, 2006 11:57 pm

Well, I've pretty much set my mid to do this. It doesn't matter too much if it doesn't sound SRV, oh, well, I'll either dig it or share it with someone who does. I am honestly having a hard time imaging it sounding bad with a strat, assuming I can get it put together right.

And I'm not interested in being an SRV clone, but it would be nice if I can cop the tone once in a while.
42

User avatar
Flames1950
Senior Member
Posts: 9294
Joined: Sun Feb 08, 2004 1:04 am
Location: Waukee, Iowa

Post by Flames1950 » Wed Mar 08, 2006 12:03 am

Well, I think it sounds like a good sounding concept, I just though the gist was to cop SRV tone more closely. If that's not a true requirement you should have fun!!
Image

marshman
Senior Member
Posts: 124
Joined: Tue Feb 21, 2006 2:23 pm
Location: SE PA

Post by marshman » Wed Mar 08, 2006 12:38 am

I guess it boils down to copping the whole SRV-Strat-big-honkin'-15"-speaker-equipped-Fender-VIBE more than actual tone.

It's kinda like guitar tab...sometimes I need help finding the first few notes, but then I'm gonna play what I wanna play anyway, damn the torpedos, full schpeed ahead.

Thank you for your support.
42

User avatar
Flames1950
Senior Member
Posts: 9294
Joined: Sun Feb 08, 2004 1:04 am
Location: Waukee, Iowa

Post by Flames1950 » Wed Mar 08, 2006 6:38 am

marshman wrote:It's kinda like guitar tab...sometimes I need help finding the first few notes, but then I'm gonna play what I wanna play anyway, damn the torpedos, full schpeed ahead.
Duffman likes your attitude!!! :wink:
Image

Shredder
Senior Member
Posts: 156
Joined: Fri Jul 08, 2005 5:13 pm
Location: Ontario, Canada

Post by Shredder » Wed Mar 08, 2006 5:56 pm

You'll need a solid power section with headroom, not a sloppy Euro style tube for SRV. I think you'll just hafta upgrade to a bigger wattage Jensen or equivalent and use US-made 6L6s or 6550s.

Bill Durham
Senior Member
Posts: 122
Joined: Tue Jan 31, 2006 8:00 am
Location: Kennesaw, Georgia
Contact:

Re: AA763

Post by Bill Durham » Sun Mar 12, 2006 4:59 pm

marshman wrote:So, I'm a big SRV fan, and I'd love to buld myself a Vibroverb. I already have a nice, old 15"JBL from the late 70s, but it's only a 25 watt/16 ohm unit, so I"m looking to use a dual 6V6 power section. Sort of like a Vibro preamp on a Deluxe Reverb power amp.

Except that it would appear that that IS a Deluxe Reverb. Or so it would seem.

Just how many amps used this AA/AB 763 design? DR? Vibroverb? Any others? Supers? Twins?
You might take a look at the AX84.com projects called the October and November amps. The October has a Marshall front end and 6V6 output, and the November is more Fenderish with 6V6 outs as well.

BD

Post Reply