Help on Night Owl's Step 10 instructions

[dante]

Thanks guys for all your help! Everytime I am getting a step closer. I instlled the purple wire from the presence pot to the board and now I am getting presence and full volume on Volume II. I was playing on it for a while tonight. Volume I high and low still doesn't increase or decrease it just has the same volume. Any ideas?

[dante]

Anybody have any ideas on why the volume I high and low still doesn't increase or decrease it just has the same volume. This is my first build

[neikeel]

Need some pics of your pot wiring

[axeman]

Anybody have any ideas on why the volume I high and low still doesn't increase or decrease it just has the same volume. This is my first build

Your bright capacitor on the volume pot might be faulty or soldered poorly. Move it, then turn the amp and see what it does, if continues remove it. Those capacitors suck.

[dante]

Thanks folks for giving some feedback. I am going to check the capacitor today and takes some pics of the pot wiring. Appreciate all the help.

Dante