Metro 12,000 Power Tubes

The good, the bad and the ugly.

Moderator: VelvetGeorge

Post Reply
User avatar
Classic 59
New Member
Posts: 31
Joined: Fri Feb 12, 2010 8:57 pm
Just the numbers in order: 7

Metro 12,000 Power Tubes

Post by Classic 59 » Thu Jan 14, 2016 8:10 am

Getting ready to re-tube my amp. What are some of the best power tubes these days? I have been using the EH 6CA7's.
Last edited by Classic 59 on Thu Jan 14, 2016 11:03 pm, edited 1 time in total.

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Re: Metro 12,000 Power Tubes

Post by VelvetGeorge » Thu Jan 14, 2016 11:08 am

I would have loaded it with Mullard reissue EL34's. If you want to use those, contact Laura at Valvequeen. She supplies all the tubes for the Metro-Plex and is awesome.

george
Check out Plexi Replicas for my personal amp builds...
Image

wangbar
New Member
Posts: 11
Joined: Tue Mar 31, 2009 9:10 pm
Just the numbers in order: 7

Re: Metro 12,000 Power Tubes

Post by wangbar » Fri Feb 24, 2017 8:54 pm

VelvetGeorge wrote:I would have loaded it with Mullard reissue EL34's. If you want to use those, contact Laura at Valvequeen. She supplies all the tubes for the Metro-Plex and is awesome.

george
What is it that you like about these George? Would you use Mullard 12ax7 pre's too? Just curious.

User avatar
GilmourD
Senior Member
Posts: 144
Joined: Sat Oct 12, 2013 7:47 pm
Just the numbers in order: 13492

Re: Metro 12,000 Power Tubes

Post by GilmourD » Sun Feb 26, 2017 9:51 pm

I hear the NewSensor Svetlana EL34s are pretty awesome but I don't have first hand experience. What I do have first hand experience with in a 1959-type circuit are the JJ 6CA7s. Those with JJ ECC803S long-plates... HOLY MOLY! Clear and sweet with a "normal" control config and only missing the Variac for EVH with everything dimed.

I do wanna try the Svets, though, once I get the cash for a quad.

User avatar
wdelaney72
Senior Member
Posts: 1619
Joined: Sun Jan 22, 2006 9:04 pm
Location: Chicago Suburbs

Re: Metro 12,000 Power Tubes

Post by wdelaney72 » Wed Mar 01, 2017 4:43 pm

I'd never argue with George....can't go wrong there.

For a different flavor, I've been happy with the Electro-Harmonix 6CA7
Walter

"There's no great thing in being a soloist. I think the hardest thing is to play together with a lot of people, and do it right." - Angus Young, 1984

User avatar
JPA
New Member
Posts: 17
Joined: Sat Mar 01, 2014 8:00 am
Just the numbers in order: 13492

Re: Metro 12,000 Power Tubes

Post by JPA » Thu Mar 02, 2017 6:51 am

Currently JJ's new EL34 II is my favourite tube. Very dynamic and natural sound with lots of headroom. The only thing I'd consider to be better are the SED Winged C EL34 (the old ones). Since they're hard to get at the moment they can be very pricey. But heck, JJs are pretty damn close!

User avatar
bill bokey
Senior Member
Posts: 490
Joined: Sun Jan 02, 2011 2:54 pm
Just the numbers in order: 13492
Location: France
Contact:

Re: Metro 12,000 Power Tubes

Post by bill bokey » Fri Mar 03, 2017 4:32 am

JPA wrote:Currently JJ's new EL34 II is my favourite tube. Very dynamic and natural sound with lots of headroom.
I tried them last week and thought exactly the opposite ! :lol:
Compared to the TAD EL34B (made by Shuguang) they lacked headroom. They also had a smoother tone, less bass and not as bright. Not saying they're a bad tube, just not what I needed for that particular amp ;)

User avatar
JPA
New Member
Posts: 17
Joined: Sat Mar 01, 2014 8:00 am
Just the numbers in order: 13492

Re: Metro 12,000 Power Tubes

Post by JPA » Sun Mar 05, 2017 6:38 am

bill bokey wrote: I tried them last week and thought exactly the opposite ! :lol:
Compared to the TAD EL34B (made by Shuguang) they lacked headroom. They also had a smoother tone, less bass and not as bright. Not saying they're a bad tube, just not what I needed for that particular amp ;)
So In what amp did you put the tubes in? I tried the JJ EL34 II in my 100 W Marshall 1959 and in an Engl 50 W rackmount power amp and they kicked ass! In contrast I didn't like the TAD EL34B in these amps :scratch: Sounded too bright and a little bit cold for my personal taste.

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Re: Metro 12,000 Power Tubes

Post by VelvetGeorge » Tue Mar 07, 2017 3:57 pm

There does seem to be common tonal differences between Chinese, Russian and JJ's. I often have a hard time getting Russian tubes with my preferred specs. Poor Valvequeen has to test (and reject) a bunch. And she has to deal with New Sensor. I should feel bad.

I do like the Russian tubes in the MP, but it was designed around them. I'm sure with a few tweaks the JJ's or Chinese would sounds great too.

I use the CV4004 preamp tubes. They are short plate 12AX7 types. You have to go through a bunch to find ones with good gain, low noise and not microphonic, but they do sound really good.

george
Check out Plexi Replicas for my personal amp builds...
Image

Silmaril
New Member
Posts: 18
Joined: Mon Sep 03, 2018 3:07 pm
Just the numbers in order: 13492

Re: Metro 12,000 Power Tubes

Post by Silmaril » Fri Nov 02, 2018 11:10 am

Is the difference between Mullard CV4004 RI and Mullard 12Ax7 RI big?

User avatar
axeman
Senior Member
Posts: 2464
Joined: Wed Apr 02, 2008 1:21 pm
Just the numbers in order: 7
Location: Los Angeles
Contact:

Re: Metro 12,000 Power Tubes

Post by axeman » Fri Nov 02, 2018 5:39 pm

The Mullard 12AX7 are actually Solvtek selected 12AX7LPS
Last edited by axeman on Sat Nov 03, 2018 1:30 am, edited 1 time in total.

Silmaril
New Member
Posts: 18
Joined: Mon Sep 03, 2018 3:07 pm
Just the numbers in order: 13492

Re: Metro 12,000 Power Tubes

Post by Silmaril » Fri Nov 02, 2018 7:25 pm

OK and CV4004 are also Sovtek but shortplate? Are the longplate 12ax7 Mullard RI any good? Maybe in Phase Inverter?

Post Reply