Hammond 1650-N ?
Moderator: VelvetGeorge
-
- New Member
- Posts: 5
- Joined: Tue Feb 16, 2016 9:21 pm
- Just the numbers in order: 13492
Hammond 1650-N ?
Hey gang, New to the group but have creeped for quite awhile. This seems to be the most knowledgeable and helpful site so here it goes.
I have a brand new Hammond 1650-N OT AND 17 LONG 3 IN DEEP NEW Chassis. Friend of mine was suppose to help me design an original or whatever amplifier but then held me up for another 500 bucks just for assistance. Can anyone give me suggestions and/or link to a good schematic for a solid blues amp?
Ive seen where though the 1650 is rated 60w with hammond you can x2 that possible output to 120w.
ANY HELP WOULD BE GREATLY APPRECIATED.
TRAV
I have a brand new Hammond 1650-N OT AND 17 LONG 3 IN DEEP NEW Chassis. Friend of mine was suppose to help me design an original or whatever amplifier but then held me up for another 500 bucks just for assistance. Can anyone give me suggestions and/or link to a good schematic for a solid blues amp?
Ive seen where though the 1650 is rated 60w with hammond you can x2 that possible output to 120w.
ANY HELP WOULD BE GREATLY APPRECIATED.
TRAV
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: Hammond 1650-N ?
Welcome to the forum! At 4.3k, your OT would work great with a pair of 6l6's or EL34's. What are some of your favorite amp circuits?
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: Hammond 1650-N ?
JTM45 or 50
-
- New Member
- Posts: 5
- Joined: Tue Feb 16, 2016 9:21 pm
- Just the numbers in order: 13492
Re: Hammond 1650-N ?
I'm sure it's not hard to notice but I'm a noob. I've been told with the hammon being hifi or atleast a larger or lower frequency I think, that it goes well with the bassman. I'm looking for something like a twin reverb with a 2nd channel that's distorted. I play alot of zztop/ blues and srv. Not sure if I answered your questions. If not uli apologize
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: Hammond 1650-N ?
Check marsh.com for finder builds
-
- New Member
- Posts: 5
- Joined: Tue Feb 16, 2016 9:21 pm
- Just the numbers in order: 13492
Re: Hammond 1650-N ?
Om thanks for the replyaxeman wrote:Check marsh.com for finder builds
-
- New Member
- Posts: 5
- Joined: Tue Feb 16, 2016 9:21 pm
- Just the numbers in order: 13492
Re: Hammond 1650-N ?
Marsh.com is nothing but insurance website. Didn't see that reason for the bad link but I'll take it.axeman wrote:Check marsh.com for finder builds
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
-
- New Member
- Posts: 5
- Joined: Tue Feb 16, 2016 9:21 pm
- Just the numbers in order: 13492
Re: Hammond 1650-N ?
Thank you. Apologize for the misunderstanding