icar 100K pot
Moderators: VelvetGeorge, BUG
-
- Senior Member
- Posts: 413
- Joined: Tue Oct 16, 2012 10:33 am
- Just the numbers in order: 13492
- Location: Israel. Bat-Yam
Re: icar 100K pot
I have built a marshall JCM 800 2204 and my presence pot is Ok. Try a better quality pot like CTS. I always say that they are way better than Alpha.
-
- New Member
- Posts: 26
- Joined: Sun Nov 16, 2008 4:04 am
Re: icar 100K pot
Hi,appetite4distortion wrote:6.2M seems me crazy (or shot), possibly you measured in the wrong way? did you measured when the pot was desoldered and alone?
BTW, yes, it's normal for them to drift from nominal 100K to two or three times..mine (68) is around 300k, don't remember exactly.
Unfortunately it is also normal for it to be a bit scratchy..all of them are like that more or less..it's something you have to live with, like the presence pots of marshall. That is due to design of the carcass which leaves too much gap and dust enters too easily in the traces. Surely you can clean it , but after 2 or 3 weeks it starts back again. I dunno if there are some tricks to mitigate that.
I have tried too to replace it with aftermarket pot (200K), no scratch, but in noway it sounds the same anymore ..sounds weakier, just like you said. Poor us vintage nuts!
I measured with my tech, it was on him bench. It was alone and desoldered. As you say, its normal they drift up in value to three times.
But 6.2 M is far away from it. My tech has a theory... according to him...the pot has never been 100k. It was made to deflect competitors. My wah is one the first i guess 67. The circuit was engraved in epoxy to hide it.
With that pot it sound perfect but the scratch... I tried a 200k Rmc pot and it died...really died.
-
- New Member
- Posts: 26
- Joined: Sun Nov 16, 2008 4:04 am
Re: icar 100K pot
Haze13 wrote:Can you post some pics of this wah with a 6.2 M ohm pot?
Wah does not need all that range of a pot, It uses actually some small portion of the "trace" of the pot. May be the 6.2 M Ohm pot is a special LOG type or something like it, and when the Wah at max, you get only like 200k-300k of a resistance? Can you check the resistance when the wah on the max?
These are the pictures
https://plus.google.com/photos/10671900 ... jPbY0p-jNw" onclick="window.open(this.href);return false;
-
- Senior Member
- Posts: 128
- Joined: Wed May 25, 2005 4:34 pm
- Just the numbers in order: 13492
- Location: T-Ville CT
Re: icar 100K pot
Pot looks like a stock 100K ICAR, got a close up picture? FWIW I have two here that measure around 290K
For really scratchy pots I have carefully taken them apart to clean them.
For really scratchy pots I have carefully taken them apart to clean them.
?
-
- New Member
- Posts: 26
- Joined: Sun Nov 16, 2008 4:04 am
Re: icar 100K pot
I'll post other pics..V8 wrote:Pot looks like a stock 100K ICAR, got a close up picture? FWIW I have two here that measure around 290K
For really scratchy pots I have carefully taken them apart to clean them.
Did you open it?! Would you sell one of it?!
-
- Senior Member
- Posts: 128
- Joined: Wed May 25, 2005 4:34 pm
- Just the numbers in order: 13492
- Location: T-Ville CT
Re: icar 100K pot
Yep took the cover off, cleaned then replaced the cover,sorry the pot is back in its home.
BTW nice looking Clyde you have.
BTW nice looking Clyde you have.
?
-
- New Member
- Posts: 26
- Joined: Sun Nov 16, 2008 4:04 am
Re: icar 100K pot
Thanks a lot, what did you use to clean it?V8 wrote:Yep took the cover off, cleaned then replaced the cover,sorry the pot is back in its home.
BTW nice looking Clyde you have.
-
- Senior Member
- Posts: 128
- Joined: Wed May 25, 2005 4:34 pm
- Just the numbers in order: 13492
- Location: T-Ville CT
Re: icar 100K pot
I followed this
http://www.diyguitarist.com/DIYStompbox ... ebuild.htm" onclick="window.open(this.href);return false;
the patient
http://i270.photobucket.com/albums/jj10 ... 7a42b8.jpg" onclick="window.open(this.href);return false;
http://www.diyguitarist.com/DIYStompbox ... ebuild.htm" onclick="window.open(this.href);return false;
the patient
http://i270.photobucket.com/albums/jj10 ... 7a42b8.jpg" onclick="window.open(this.href);return false;
?
-
- New Member
- Posts: 26
- Joined: Sun Nov 16, 2008 4:04 am
Re: icar 100K pot
Thank you again.
-
- Senior Member
- Posts: 128
- Joined: Wed May 25, 2005 4:34 pm
- Just the numbers in order: 13492
- Location: T-Ville CT
Re: icar 100K pot
more info on rebuilding pots
http://brawer.com/2012/02/rebuild-a-vin ... ntiometer/" onclick="window.open(this.href);return false;
and a must read, btw there could be a break in the conductive wafer on the pot measuring 6M
http://www.geofex.com/Article_Folders/p ... tscret.htm" onclick="window.open(this.href);return false;
http://brawer.com/2012/02/rebuild-a-vin ... ntiometer/" onclick="window.open(this.href);return false;
and a must read, btw there could be a break in the conductive wafer on the pot measuring 6M
http://www.geofex.com/Article_Folders/p ... tscret.htm" onclick="window.open(this.href);return false;
?