I was lookin 'round the forum and located the formula for spkr breakin.
but i'm a little confused by some of the info. for example- to break in ONE, 25w @ 16ohm speaker
requires about 11.5 volts.
but....please correct me if i'm wrong.... if i have a standard 4x12 cab to break in...do i use 100 watts
(4 spkrs) in the formula power rating? ...this would be around 23 volts??
you out there Mr. Jim Scumback?
Speaker break-in with variac
Moderators: VelvetGeorge, BUG
-
- New Member
- Posts: 48
- Joined: Tue May 29, 2012 10:45 am
- Just the numbers in order: 7
- Scumback Speakers
- Supporting Advertiser
- Posts: 4515
- Joined: Sat Jul 15, 2006 11:27 am
- Just the numbers in order: 13492
- Location: Prescott, AZ
- Contact:
Re: Speaker break-in with variac
Yup, I'm here. Send me an email, I'll send you the break in instructions. They don't format out right online.
Scumback Speakers - Kick Ass Vintage Tone
sales@scumbackspeakers.com
http://www.scumbackspeakers.com
310-833-6632
sales@scumbackspeakers.com
http://www.scumbackspeakers.com
310-833-6632
-
- New Member
- Posts: 48
- Joined: Tue May 29, 2012 10:45 am
- Just the numbers in order: 7
Re: Speaker break-in with variac
ok-- thank you!