Metropoulos Forum

Anyone have a link to a PDF of instructions or layout for a '68 12000 series? I can't find it on Valvestorm and the only one on Google (that I can find) is a Ceriatone kit. Anyone?

Wow can't believe so much layouts have been shut down from the forum since the hack !
Anyway here you go , i uploaded them ;

67 layout:
https://www.mediafire.com/?bgb073d79hah0cc

67-68 layout:
https://www.mediafire.com/?zpr9ce9k5628jfn

68 layout:
https://www.mediafire.com/?7t3b63a4gwqts0a

69 layout with one wire mod :
https://www.mediafire.com/?o3otuult8q0w2oq

Thanks. I found that '68 one in a Google search too. But it makes no mention of being a 12XXX series and also doesn't show wiring for speaker jacks or impedance switch. Do you know if that one is for a 12XXX series?

if it's not showed , it's because the wiring of the impedance switch and speaker jacks is common beween all marshall type amps .... search marshall 1959 layout in google images and find any layout that will show this part of the wiring ... any layout will do the job really ...unless you wanna wire a post phase inverter master volume , but then again this particular layout for the ppimv is everywhere on the web now ....
cheers

Ok, then I can figure that part out. But is that layout a 12xxx series or just the general 1959 circuit?

The Billy Batz layouts are pretty great. Not always historically accurate but very useful. I used them for my JTM 45/100 build, my 12,000 build and my Black Flag 50 watt build.

https://plus.google.com/photos/10738286 ... 13?sview=7

Thanks. I can't tell which is which. They aren't labeled, though the second one down looks like the 12000 ones I've seen. Is that it?

frenchie wrote: ↑

Sat Aug 27, 2016 7:41 am

Wow can't believe so much layouts have been shut down from the forum since the hack !
Anyway here you go , i uploaded them ;

67 layout:
https://www.mediafire.com/?bgb073d79hah0cc

67-68 layout:
https://www.mediafire.com/?zpr9ce9k5628jfn

68 layout:
https://www.mediafire.com/?7t3b63a4gwqts0a

69 layout with one wire mod :
https://www.mediafire.com/?o3otuult8q0w2oq

are these available elsewhere ? I get an error message trying to load them.
any help appreciated.

One of our members saved a bunch of the old Metroamp layouts to this site. Hopefully it has what you need.
https://drive.google.com/drive/folders/ ... 549g-K1iDA

danman wrote: ↑

Wed Mar 22, 2023 6:40 pm

One of our members saved a bunch of the old Metroamp layouts to this site. Hopefully it has what you need.
https://drive.google.com/drive/folders/ ... 549g-K1iDA

brilliant! many thanks.