Mustard cap question

Info about our boards and kits.

Moderator: VelvetGeorge

Post Reply
kevrockitt
Senior Member
Posts: 105
Joined: Sat Feb 28, 2009 11:00 am
Just the numbers in order: 7

Mustard cap question

Post by kevrockitt » Tue Jan 04, 2011 9:38 am

Hey fellas...hypothetical question. If you had a board complete using top quality new yellow caps but had the choice to replace any two of them with vintage NOS caps anywhere on your board what would you choose and where would you place them and why?

Thanks
Kevin

Roe
Senior Member
Posts: 5054
Joined: Thu Apr 13, 2006 1:36 pm
Just the numbers in order: 7
Location: Drontheim. Norwegen
Contact:

Re: Mustard cap question

Post by Roe » Tue Jan 04, 2011 9:57 am

Pi or after v1
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39

kevrockitt
Senior Member
Posts: 105
Joined: Sat Feb 28, 2009 11:00 am
Just the numbers in order: 7

Re: Mustard cap question

Post by kevrockitt » Tue Jan 04, 2011 1:12 pm

Roe, you would do the .022 in the phase inverter as your first choice. Just curious as to why?

kevrockitt
Senior Member
Posts: 105
Joined: Sat Feb 28, 2009 11:00 am
Just the numbers in order: 7

Re: Mustard cap question

Post by kevrockitt » Tue Jan 04, 2011 1:16 pm

Any opinions on cloth covered wire vs. PVC?

Roe
Senior Member
Posts: 5054
Joined: Thu Apr 13, 2006 1:36 pm
Just the numbers in order: 7
Location: Drontheim. Norwegen
Contact:

Re: Mustard cap question

Post by Roe » Tue Jan 04, 2011 1:17 pm

kevrockitt wrote:Roe, you would do the .022 in the phase inverter as your first choice. Just curious as to why?
depends on amp
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39

Post Reply