Page 1 of 1

Looking for split turrets.

Posted: Mon Oct 19, 2009 11:23 am
by axeman
Looking for part # of split turrets for project.

Re: Looking for split turrets.

Posted: Mon Oct 19, 2009 4:19 pm
by joey
Look on the Keystone website. They have a catalogue page with all the turrets they make. you then have to find a place that stocks them, the keystone site will help with this too.

Re: Looking for split turrets.

Posted: Mon Oct 19, 2009 4:33 pm
by axeman
Thanks Joey.

Re: Looking for split turrets.

Posted: Tue Oct 20, 2009 6:05 am
by neikeel
What is wrong with these :wink:

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.

Re: Looking for split turrets.

Posted: Tue Oct 20, 2009 11:49 am
by axeman
neikeel wrote:What is wrong with these :wink:

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.
Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks

Re: Looking for split turrets.

Posted: Tue Oct 27, 2009 12:57 pm
by flemingmras
neikeel wrote:
I use these since my big bag of NOS RS one sran out.
I bet those NOS turrets sound killer. :mrgreen:

Re: Looking for split turrets.

Posted: Tue Oct 27, 2009 1:08 pm
by Structo
axeman wrote:
neikeel wrote:What is wrong with these :wink:

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.
Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks
I believe Metro is located in Michigan so not sure you can just drive over there from Anaheim. :mrgreen:

Re: Looking for split turrets.

Posted: Tue Oct 27, 2009 1:13 pm
by flemingmras
Structo wrote:
axeman wrote:
neikeel wrote:What is wrong with these :wink:

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.
Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks
I believe Metro is located in Michigan so not sure you can just drive over there from Anaheim. :mrgreen:
LOL I remember a time when I lived out there and I DID just drive over there 1/2 the time. :mrgreen:

Re: Looking for split turrets.

Posted: Tue Oct 27, 2009 1:37 pm
by axeman
Structo wrote:
axeman wrote:
neikeel wrote:What is wrong with these :wink:

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.
Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks
I believe Metro is located in Michigan so not sure you can just drive over there from Anaheim. :mrgreen:

:lol:

Re: Looking for split turrets.

Posted: Tue Oct 27, 2009 2:41 pm
by neikeel
flemingmras wrote:
neikeel wrote:
I use these since my big bag of NOS RS one sran out.
I bet those NOS turrets sound killer. :mrgreen:
:lol:

The good thing about them was that they actually fitted the turret boards snugly, came with the correct staking tools and were pretinned so soldered really well 8)

Re: Looking for split turrets.

Posted: Sat Jan 23, 2010 7:57 am
by wrea398
The split turrets at Turretboards.com are pre-tinned.

Re: Looking for split turrets.

Posted: Sun Mar 24, 2013 5:15 pm
by TJB
Hey guys,
I picked up a metro 2203 ptp board and I need about (6) turrets to add a couple parts to the board. I tried pressing out one of the unused ones from the right end by the diodes but ended up wrecking it in the process. I actually could get by with (2) but could use a few spares too. I could go with the standard turrets that Metro used on these boards or split turrets.

I would also need to know where to get the correct size drill bit and what that size is.
If anyone has a few to spare or could tell me where to get a few, please send me a PM. I don't need to buy a whole bag, just a few. Thanks!