Page 1 of 1
50w Plexi and MXR 6 band
Posted: Mon Sep 11, 2023 7:40 pm
by paulscape
Forgot how much hair this pedal adds! Fun to muck around with again!
https://youtu.be/DJcC4-3ATjQ?si=o8q64q13iRqpUUKV
Re: 50w Plexi and MXR 6 band
Posted: Wed Sep 13, 2023 2:16 pm
by Tazin
The only drawback is that they can add a decent amount of hiss if set too extreme.
Re: 50w Plexi and MXR 6 band
Posted: Wed Sep 13, 2023 7:40 pm
by paulscape
Tazin wrote: ↑Wed Sep 13, 2023 2:16 pm
The only drawback is that they can add a decent amount of hiss if set too extreme.
Yeah mostly noticeable doing quiet parts. Eddie must have only used this on eruption with the EC80, to drive long cable runs occasionally and the odd use early on for lower output guitars. It’s just too gainy otherwise! I also have a 70’s line driver/ gate at the end of my board but I never use the noise gate function.
Re: 50w Plexi and MXR 6 band
Posted: Sat Sep 16, 2023 1:23 am
by paulscape
Here’s another clip without and with MXR 6 band and also using Ozone 9 Match EQ this time! Interesting how ‘smooth’ Ed’s EQ profile is compared to mine with troughs across the mids and highs. The Match EQ can assist quite a bit in smoothing, boosting and cutting the right frequencies.
https://youtu.be/_ELSy7m00yA?si=d-77wrPzMIl1g0mk
Re: 50w Plexi and MXR 6 band
Posted: Mon Sep 18, 2023 4:47 am
by paulscape