1200 series

CALI · Post by **CALI** » Thu Nov 05, 2009 5:54 pm

If I got a 1200 I suppose the only way to make the amp give up the brown tone at reasonable club levels is to use an attenuator. I have a Phantom coming in a week or so ..that should do the attenuation trick but I imagine the only way to get the brown tone is to basically dime everything. Isn't that really bad for the tubes to run it like that all the time?

What do you Guys do?

Thanks!

-Chris

neikeel · Post by **neikeel** » Fri Nov 06, 2009 12:14 pm

Using the stock Metro 12 series with the virtual variac and PPIMV you can get the brown sound at 8 on the dial with the rest of the EQ to taste.

No need to dime everything.

Would love to hear how the Phantom works out

CALI · Post by **CALI** » Fri Nov 06, 2009 1:56 pm

neikeel wrote:Using the stock Metro 12 series with the virtual variac and PPIMV you can get the brown sound at 8 on the dial with the rest of the EQ to taste.

No need to dime everything.

Would love to hear how the Phantom works out

8 on the preamp dial and then roll the master to whatever level right?

Thanks for your help!

-Chris

ElDuderino · Post by **ElDuderino** » Mon Nov 09, 2009 12:11 pm

I have #12052 and use it with a matching Metro 4X12 slant with the english 20w greenbacks and a Alex Attenuator and it screams with my LP. Best tone and the most fun I have ever had playing...I have owned about everthing out there....dumble, boogie 2C+, soldano, real 50w plexi, real 59 bassman, real 58 bandmaster, on & on and the 12000 series is to me the BEST tone ever. I can dial in Cream era "wheels" tone in the #2 channel and over in #1 dimed @400v setting get the big fat Ed tone....George is the man and makes the best replicas period. I have to give credit to the Alex Att. also...I could never get that tone in my house or jamming with friend without it.

CALI · Post by **CALI** » Mon Nov 09, 2009 12:22 pm

ElDuderino wrote:I have #12052 and use it with a matching Metro 4X12 slant with the english 20w greenbacks and a Alex Attenuator and it screams with my LP. Best tone and the most fun I have ever had playing...I have owned about everthing out there....dumble, boogie 2C+, soldano, real 50w plexi, real 59 bassman, real 58 bandmaster, on & on and the 12000 series is to me the BEST tone ever. I can dial in Cream era "wheels" tone in the #2 channel and over in #1 dimed @400v setting get the big fat Ed tone....George is the man and makes the best replicas period. I have to give credit to the Alex Att. also...I could never get that tone in my house or jamming with friend without it.

You're killing me Dude! I'm painfully waiting for something to sell before I can get one.

-Chris

CALI · Post by **CALI** » Tue Nov 10, 2009 6:18 pm

Ordered! Now, the painful wait.

-Chris

ElDuderino · Post by **ElDuderino** » Fri Nov 13, 2009 2:14 pm

Good man Chris!! You are going to love it!

CALI · Post by **CALI** » Tue Dec 08, 2009 12:23 am

I just got word today that George "fired up" my 1200 last weekend and that I'll have shipping details soon!

...I'm like a kid waiting for Christmas

-Chris

Post by **admin** » Wed Dec 09, 2009 6:11 pm

Can't wait to hear it!

Post by **VelvetGeorge** » Wed Dec 09, 2009 6:38 pm

#12056 shipped today! Your wait won't be too much longer.

george

CALI · Post by **CALI** » Thu Dec 10, 2009 11:33 am

Yes!!!

How about some pics?

-Chris

Post by **VelvetGeorge** » Thu Dec 10, 2009 12:03 pm

Just added to the archive:

http://plexireplicas.com/amplifier-arch ... 000/12056/" onclick="window.open(this.href);return false;

george

CALI · Post by **CALI** » Sun Dec 13, 2009 5:50 pm

Sorry if this is a dumb question but can the following be done with the 1200 Series?

100 Watt to 50 Watt

This is a simple and effective way to reduce some of the output power to lower the overall volume of the Super Lead. First, open the back panel of your amp and then remove the outside two power tubes, leaving the two in the center. That’s basically it, but then there is one important thing to do – If you are using one 16 ohm cabinet, you’ll need to "halve" the ohm rating on your head and change it to 8 ohms. If you are using two 16 ohm cabinets, where your normal ohm setting is 8 ohms, you will need to set the head now to a 4 ohm load.

When running at 100 watts with all four tubes in the head, the rule of thumb to remember with impedance settings is that the amplifier’s ohm load must NOT exceed the load of the speaker cabinet. That is, don’t ever run a Super Lead head at 16 ohms into an 8 ohm cabinet as it puts a strain on the head and could damage it. It is quite o.k. however to do the opposite. An 8 ohm (or even a 4 ohm) head setting into a 16 ohm cabinet will just produce less output power but will not damage the head.

Roe · Post by **Roe** » Mon Dec 14, 2009 4:17 am

yes, but do not try that mismatch on the jtm45 kt66 amps

CALI · Post by **CALI** » Mon Dec 14, 2009 10:28 pm

I got the amp today and I have to say that not one thing I've read or heard has been exaggerated. This amp smokes! This amp is a masterpiece. I know I have only scratched the surface but so far these tones are blowing me away.

Running it with a '57 Blackburn Mullard in V1 and two Tungsgrams in V2 & V3. Wow, what an amp!

I can only imagine what it's gonna be like when it's broken in!

Rock on George!

I'll get some clips rolling this week!

-Chris

Metropoulos Forum

1200 series

1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series

Re: 1200 series