JCM45 Reissue PTP Board Wiring Diagram and Metro JCM45 use??

New here? Need help? Don't know where to post? Post here.

Moderator: VelvetGeorge

Post Reply
User avatar
tonymckenzie
New Member
Posts: 14
Joined: Thu Sep 17, 2009 12:40 pm
Just the numbers in order: 7
Location: UK
Contact:

JCM45 Reissue PTP Board Wiring Diagram and Metro JCM45 use??

Post by tonymckenzie » Fri Sep 18, 2009 10:08 am

There appears to be no wiring diagram for this board when you're going to fit it in to a Marshall JTM45 Reissue. Thats my first question - where do I find one.

Secondly, if I decide not to install this board in to my great sounding JTM45 Reissue, can I easily use it for making a metro JCM45 without any real bother?

any help with these two points would be useful - I cant find the answer anywhere on this forum for these two questions...

thanks


tonym
Play it LOUD - You know it makes sense....

User avatar
tonymckenzie
New Member
Posts: 14
Joined: Thu Sep 17, 2009 12:40 pm
Just the numbers in order: 7
Location: UK
Contact:

Re: JCM45 Reissue PTP Board Wiring Diagram and Metro JCM45 use??

Post by tonymckenzie » Sat Sep 19, 2009 2:13 pm

OK I found the answers myself.

Thanks guys for all the help... Ill bear it in mind.

Newbie yes, but I really did think this was for help... I was probably wrong.


bye bye.
Play it LOUD - You know it makes sense....

Spodeeodee
Senior Member
Posts: 194
Joined: Fri Nov 21, 2008 11:32 pm

Re: JCM45 Reissue PTP Board Wiring Diagram and Metro JCM45 use??

Post by Spodeeodee » Sun Sep 20, 2009 3:04 pm

:roll:
Travis
-Metro JMP50

User avatar
neikeel
Senior Member
Posts: 7231
Joined: Tue Dec 06, 2005 8:31 am
Location: Suffolk, England

Re: JCM45 Reissue PTP Board Wiring Diagram and Metro JCM45 use??

Post by neikeel » Wed Sep 23, 2009 5:33 am

Hi Tony

I think you will find that posting stuff on a Friday evening and expecting a plethora of responses by early Saturday evening is being a little optimistic :wink: Most people here are out partying or gigging both of these nights.

Your RI board can be used in a metro kit if you decide to keep your original stock but the hole spacing on the mounting bolts is different between an RI and original (which is what the kit spacing is based upon).

I personally would build a new amp from scratch and keep the RI stock having been lured into this whole thing by a similar project. If you are into blues get Georges stock JTM45 kit if you want to rock out get the 50watt kit with lead and bass specs. to allow you to dabble...........

Cheers
Neil

User avatar
tonymckenzie
New Member
Posts: 14
Joined: Thu Sep 17, 2009 12:40 pm
Just the numbers in order: 7
Location: UK
Contact:

Re: JCM45 Reissue PTP Board Wiring Diagram and Metro JCM45 use??

Post by tonymckenzie » Fri Sep 25, 2009 3:34 pm

Thanks for the info....

you know how it is.... eager and stuff... it was just lacking a bit in finding the info....

you're right, some go out fridays and saturdays too....

But the whole world does not - so whoever was left could have easily solved my little ditty...

but they did'nt! I did. Still, I suppose I got in to it in the first place.

Anyhow, thanks for your info its very useful and Ill bear that in mind. Actually I have some bits from Ceriatone as well as metro amp (because of costs to the UK).

I reckon I can 'merge' the two easily enough. Maybe i'll put the results up on here - we shall see.
Play it LOUD - You know it makes sense....

Post Reply