Sorry for the newb question...I'm trying to figure out what the long black wire hanging off of ground point #1 is connected to. It kind of gets lost in the photo. Could someone please fill me in?
Thx
Moderator: VelvetGeorge
Yes - definitelyConed1969 wrote:Got it...the yellow/green wire on my PT. I have that connected to the PI cap ground lug at present. Is it worth moving it to ground point #1 or would it be OK to leave it where it is?
2) In the "old school" grounding scheme, the input jacks would get grounded to the buss wire on the back of the tone pots. Where do the input jacks get grounded in Larry's scheme? I didn't see anything in the photos.
The bias ground goes to #4. The other side is the positive side of the bias caps.1) In this photo...what does the black "Bias Ground" wire connect to (which grounding point AND which component on the other end)?
Inputs are grounded at #12) In the "old school" grounding scheme, the input jacks would get grounded to the buss wire on the back of the tone pots. Where do the input jacks get grounded in Larry's scheme? I didn't see anything in the photos.