screen grid resistor question

sub · Post by **sub** » Tue May 17, 2005 5:36 pm

Is good screen grid resistor?
This is 10W, but only 500V DC

http://uk.farnell.com/jsp/endecaSearch/ ... 6910&N=401

Sub

Guest · Post by **Guest** » Tue May 17, 2005 7:41 pm

sub · Post by **sub** » Tue May 17, 2005 9:19 pm

It's all right! Cool resistor!
My problem is many thousand miles <----> by Metro

Sub

Dax · Post by **Dax** » Tue May 17, 2005 9:47 pm

AAAH! I get it. I would think you could find Ohmite resistors where you are at. Good luck, I'm not sure about 10 watts.

Dax

sub · Post by **sub** » Wed May 18, 2005 4:26 pm

Dax wrote:AAAH! I get it. I would think you could find Ohmite resistors where you are at. Good luck, I'm not sure about 10 watts.

Dax

Ok! Thank you!
I try find Ohmite............ till now, it was a failure
Up to now i used this: http://uk.farnell.com/jsp/endecaSearch/ ... 1668&N=401
is correct?

Dax · Post by **Dax** » Wed May 18, 2005 4:43 pm

I am not sure. Looks to be ok. Flames, what do you think, does it look kinda small?

Dax

Flames1950 · Post by **Flames1950** » Thu May 19, 2005 12:41 am

It's rated for 5 watts, so it should be good to go.

Eoin · Post by **Eoin** » Thu May 19, 2005 8:45 am

It's 25mm, which is the same size as an Ohmite, give or take a few mils. Is 500Vdc enough for a screen resistor? DC current scares me.

Billy Batz · Post by **Billy Batz** » Thu May 19, 2005 8:55 am

Eoin wrote:It's 25mm, which is the same size as an Ohmite, give or take a few mils. Is 500Vdc enough for a screen resistor? DC current scares me.

It scares me too.

sub · Post by **sub** » Thu May 19, 2005 6:02 pm

Eoin wrote:It's 25mm, which is the same size as an Ohmite, give or take a few mils. Is 500Vdc enough for a screen resistor? DC current scares me.

Why not enough that 500VDC?
What is Ohmite current ?
(My B+ is 460VDC)

Thanks

Sub

sub · Post by **sub** » Fri May 20, 2005 6:39 pm

I don't understand this ----->Ohmite is 330V??????????

Sub

sub · Post by **sub** » Sun Jul 03, 2005 10:46 pm

sub wrote:Is good screen grid resistor?
This is 10W, but only 500V DC

http://uk.farnell.com/jsp/endecaSearch/ ... 6910&N=401

Sub

Are you sure this resistor is wrong?
I bought this (cool looking

vitreous, green colored)
10W is wrong?

I saw this resistor in Bluesbreaker (7W version)
here: http://forum.metroamp.com/viewtopic.php?t=735

Sub

sub · Post by **sub** » Fri Jul 08, 2005 9:25 pm

Stupid question or difficult, barren.......?????????

Sub

Metropoulos Forum