Guys
I have a buddy with a 73 SB amp and I recapped it last month. It works awesome however the bulgin connection is dodgy. I'm in Canada and I want to modify it or repair it. There is very little tension there and the plug falls out. Not very good at all for the amp!
What's the best way for me to tackle this?
Please post opinions to thread.
Bulgin connection 73 Superbass
Moderator: VelvetGeorge
-
dan_tramble
- New Member
- Posts: 37
- Joined: Fri Dec 19, 2014 11:34 am
- Just the numbers in order: 13492
Bulgin connection 73 Superbass
MetroAmp addict!
JTM 50/45,1987's & 1986
1959 and 2203/2204 Amps
1974 amp
Can't stop building, very addictive!
JTM 50/45,1987's & 1986
1959 and 2203/2204 Amps
1974 amp
Can't stop building, very addictive!
-
coldengray
- Senior Member
- Posts: 186
- Joined: Mon Jun 24, 2013 3:39 pm
- Just the numbers in order: 13492
Re: Bulgin connection 73 Superbass
You can get a new one on eBay, they pop up from time to time. Or you can replace it with an IEC, rotating it sideways to fit the hole.
My '73 is a hardwired line, I would like to install a Bulgin but will probably just replace it with a 3 prong that is probably grounded.
My '73 is a hardwired line, I would like to install a Bulgin but will probably just replace it with a 3 prong that is probably grounded.