Hopefully, this is an easy question...
Regarding the bias circuit of a JTM45/100...can someone confirm that:
-The bias splitter resistors are 220K
-The bias supply dropping resistor is 150K
-The bias pot is 25K linear
-The bias resistor in line with the bias pot is 47K
???
The reason why I ask is because I've seen other values here and there, in particular with the bias resistor and pot...so wanted to see if someone can confirm.
Thanks
Rip
Bias Circuit
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: Bias Circuit
the 47k and 150k varies slightly. The important thing to remember is to bias the tubes correctly
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
-
- Senior Member
- Posts: 567
- Joined: Tue May 13, 2008 1:14 am
Re: Bias Circuit
Thank you
Seems like I'll try the nominal valves...I'll be back if I need to tweak it
Thanks
Rip
Seems like I'll try the nominal valves...I'll be back if I need to tweak it
Thanks
Rip