Metropoulos Forum

Hello guys !

after a year and a half collecting parts, receiving some great help from so many members here and out of here, i want to thank Billy Batz, Karlis, Brian Wallace, Shakti, Neikeel, Sparky, Steve marshall, Parkhead, and every others involved.

i'd like to start this thread with the parts i've collected, because i'd have to make some choices. Not all parts are present on the pictures. If you have some advices, please ! feel free.

The caps

more caps

Very nice dude. I'm building one of those, still at the stage of gathering parts. I have not even found a chassis and you're building two of those. Send me half of the parts will ya

silver micas resistors and diodes

Switchs - Scott knobs - light indicators - Plugs - Selectors - Fuse holders - selector

Wirewound resistors - metal oxyde resistors - Cliff jacks

Where did you get the chassis?

NOS preamp tubes - Shuegang KT66 - Mesh holders - Tube sockets - Pink wire - Mounting screws - tranformer mounting plate - Original RS perforated paxolin boards - Harwin turrets - Turret skating tool

My Stock of piher resistors - other Mullard mustard sets - iskra set - tubes - parts - Front plate for JTM45 - JTM Blackflag - Super amplifier rear plates - Super 100 decals -

More later, a list, etc. good night !

BoogieEngineer wrote:Very nice dude. I'm building one of those, still at the stage of gathering parts. I have not even found a chassis and you're building two of those. Send me half of the parts will ya

ha ha. patience, this is the word. the chassis come from Brian Wallace.
still a few parts on the way incuding original RS turrets, another modern selector etc.

i'll start this build with the modern selectors and plug, and transfer all this into another chassis or simply build my second JTM 45/100 with vintage selectors etc, and leave this one this way, or not.

Wow, nice parts collection. Can you tell me were I can buy the AC sockets?

the main bulgin plug ? on ebay i think.

And where did you get the blue resistors for power tube sockets? Is that 1R 2W or 1W? 5% tolerance from the look I guess?

i think that i've got it from valvestorm, not sure. i don't remember the values, i'll have to look for it and list everything.