Metropoulos Forum

Hi everybody,

In Germany there's such a beautiful wheather, best time to start with my JTM45/100 No.2 on the terrace.
Milled endblocks, laser cut chassis and some NOS parts.

Enjoy the pics

Cheers

Dom

Superb!

Beautiful!

george

Stunning chassis and blocks

Looks really amazing! Congratulations on the great chassis and blocks Dominik - don't see how there could be any an improvement on these.

Regards,

VintageCharlie

Wow!

Beautiful!! Any chance of selling some of those chassis and endblocks?

Dom, is that a Wima you have as v1 bypass cap? If you have a spare one i'd be very interested - i have only one with one very short lead.

Best regards,

VintageCharlie

VintageCharlie wrote:Dom, is that a Wima you have as v1 bypass cap? If you have a spare one i'd be very interested - i have only one with one very short lead.

Best regards,

VintageCharlie

Hi Karlis,
The V1 cap is a Sprague. TE1105 is the article no.
250uF, 6V , just like the Wima.
Don't know how they affect the tone, but they look very close to the old Wimas 250/6.

If anybody has questions regarding the chassis or blocks, PM me.

Dom

Beautiful chassis are they still available?

It would make a fantastic chassis for my amp..

Thanks

Sadly no, I don't think he's selling these anymore. I wish. I kick myself all the time for not ordering one when they were available. He's still making them for his amp co though. If he'd open that door I'm sure he could sell a bunch!

I'd also like to have a 45/100 with the twin OTs.

Sign me up!

I've made a limited run of 15 chassis' of these, and there are still some left. Unfortunately the last ones have more scratches. But for one who's into metal works should be able to polish them scratches away. I've also some rear panels.

Wow, really? How much are you wanting? Very interested!!!

Wow I wish I had found out about you making those chassis while I was building mine. So classy it looks

Another pic of the bend blocks after treating them with sandpaper, hammer and steel wool.