100W board question

mjbrown · Post by **mjbrown** » Sat Oct 27, 2007 3:13 pm

Should there be a turret lug above where the blue tape is?

toner · Post by **toner** » Sat Oct 27, 2007 3:22 pm

The '69 layout and board pics have a turret there so I would say yes. However, the only things connected there are a jumper from the bias trim pot and the bias resistor. You can easily run the resistor directly to the upper trim pot turret.

mjbrown · Post by **mjbrown** » Sat Oct 27, 2007 4:54 pm

Good idea! Thanks toner!

toner · Post by **toner** » Sat Oct 27, 2007 8:52 pm

After thinking about it, I'm not sure if the 1w CF resistors are long enough for that. I think they are but it might be close. You could extend the resistor with some buss wire or use a 2w MF there if you don't have another turret.