1M Resistor on input jacks?

planetjimi · Post by **planetjimi** » Tue Feb 27, 2007 3:45 pm

Just got my 100w plexi kit and was looking over the step by step. The step by step says that the HIGH input jack gets the 1M resistor, but the picture shows the jack labeled as LOW having the resistor on it. Which one is it?
Thanks, I'm sure this will be the 1st of many questions.
Jimi

Flames1950 · Post by **Flames1950** » Tue Feb 27, 2007 4:03 pm

The side shot of the jacks is labelled wrong. That is how the jacks will look when you put them in, with the chassis upside down........so the bottom jack is actually the high input!!

planetjimi · Post by **planetjimi** » Tue Feb 27, 2007 4:18 pm

Thanks Flames