Very Low volume problem

Discuss your builds of MetroAmp Kits.

Moderator: VelvetGeorge

Post Reply
x11i
New Member
Posts: 2
Joined: Thu Jan 24, 2013 12:21 pm
Just the numbers in order: 13492

Very Low volume problem

Post by x11i » Fri Jan 25, 2013 10:17 am

I used the metro amp superlead drop in board to rebuild a 90s superlead reissue. I also switched it to a superbass and switched it to kt88s. It sort of works but the volume is about as loud as a tv set half way turned up. Its not the 470ohm 470k mixup. Here is a link to some high res photos. I know the wiring is not the best, this is the first tube amp I have worked on and I should have picked a simpler project.

http://70.40.205.98/amp" onclick="window.open(this.href);return false;

x11i
New Member
Posts: 2
Joined: Thu Jan 24, 2013 12:21 pm
Just the numbers in order: 13492

Re: Very Low volume problem

Post by x11i » Mon Jan 28, 2013 8:03 pm

did I post this to the wrong section of the forum? should it have gone in the Marshall section, it seems that this section is dead. Can I move the post? thanks

Post Reply