Metro 12000 Series Build

Discuss your builds of MetroAmp Kits.

Moderator: VelvetGeorge

Post Reply
PeterJ_22
Senior Member
Posts: 117
Joined: Tue Feb 01, 2011 1:36 am
Just the numbers in order: 13492
Location: Australia

Metro 12000 Series Build

Post by PeterJ_22 » Fri Oct 19, 2012 10:43 pm

Hi guys I'm not sure if this belongs here or the 12000 series thread but I'll ask anyways.
I have built around half a dozen ceriatone marshall style amps in the past so have some experience with building,
However I'm looking to build a 12000 series head using parts from valvestorm and following "Nightowls 12xxx build guide"

I just have a few questions:

1) What model transformers would I need (I am in Australia aka 240v), especially for the virtual variac function?
2) Do valvestorm offer chassis / rear panels with an IEC socket as aposed to a hard wired power cable?
3) Do any other brands (classic tone / mm / etc) offer alternative (possibly cheaper) direct bolt on transformers of the correct specs for this build / chassis?

I've probly forgot a few questions, but thats a start!

Any help would be greatly appreciated.

Cheers - Peter

User avatar
neikeel
Senior Member
Posts: 7231
Joined: Tue Dec 06, 2005 8:31 am
Location: Suffolk, England

Re: Metro 12000 Series Build

Post by neikeel » Sat Oct 20, 2012 1:23 pm

PeterJ_22 wrote: 1) What model transformers would I need (I am in Australia aka 240v), especially for the virtual variac function?
The OT needs to be a C1998 Dagnall type (Metro, Marstran, ****** or an original) don't skimp.
PeterJ_22 wrote: 2) Do valvestorm offer chassis / rear panels with an IEC socket as aposed to a hard wired power cable?
Most rear panels are blank so you can cut a hole. I believe Metro are doing 12 series chassis.
PeterJ_22 wrote: 3) Do any other brands (classic tone / mm / etc) offer alternative (possibly cheaper) direct bolt on transformers of the correct specs for this build / chassis?
Don't skimp on the OT. A PT with dual voltage is normally the Metro one to cope with virtual variac switching (400v and 490v options), although I think both Marstran and ****** do them too.
I would go with the cheapest inc. shipping etc from any of these 3.
Neil

PeterJ_22
Senior Member
Posts: 117
Joined: Tue Feb 01, 2011 1:36 am
Just the numbers in order: 13492
Location: Australia

Re: Metro 12000 Series Build

Post by PeterJ_22 » Sat Oct 20, 2012 5:17 pm

Thanks for the reply,
If I were to order these from the metro amp store, what are the PT / OT / Choke model numbers?
Cheers.

Post Reply