Installing Two Sozo 100uf royals on the cap Board BB kit????

tone chaser · Post by **tone chaser** » Sun Sep 20, 2009 2:43 pm

I'm building a 68 and Im lost with the wiring of these caps! Any help would be greatly appriciated. Excuse my lack of knowledge Im just learning this my first amp that I am building!

I was able to remove the turrets, does the wiring stay the same on the + and - side these caps are just on one side. I not confide of this!!!!!!!!!!!!Kinda lost

itsonlyadam · Post by **itsonlyadam** » Sun Sep 20, 2009 11:34 pm

Reference this file: http://homepage.mac.com/gaden/.cv/gaden ... df-zip.zip

Got it from here: http://homepage.mac.com/WebObjects/File ... US&lang=en

itsonlyadam · Post by **itsonlyadam** » Sun Sep 20, 2009 11:48 pm

That's not my web page, BTW. Also, you're building a 12xxx series amp (presumably to attain those sweet, juicy EVH tones), right? So then what's the "BB" doing in the heading for this topic? It's my understanding that "BB" signifies "BluesBreaker" (the JTM45 Combo). Kinda misleading

. I totally clicked this article thinking it was something about a JTM45 kit. Anyway, hope that image helps.

OHHHH! Totally just got it! "BB" in your case = "Bare Bones" Got it! My bad. Hopefully the image helps. Just remember, with electrolytic capacitors (like the SoZo Royal 67s and the F&T capacitors that would be there in the unmodified 12xxx kit) there is a positive (+) terminal and a negative (-) terminal. As long as you keep the wires that were going to each respective end the same, then the amplifier should end up the same.

tone chaser · Post by **tone chaser** » Mon Sep 21, 2009 1:49 am

Thanks for the responds adam.That link is awesome. Thank you so much...
(BB) means bare bones in my case sorry................

Omn · Post by **Omn** » Mon Sep 21, 2009 3:41 pm

Along searching the forum I have tried to guide tone chaser through this path where the caps from my own build (like the caps in BBs layout "67/68 superlead") are changed to Royal 67. Them caps in a 12xxx I have only seen George do it.

If he keeps the directions of the diodes as in 67/68, will these changes do? I would hate to be responsible for him blowing up the amp...

http://img89.imageshack.us/i/mainboard6812xxx007df.jpg/
http://img89.imageshack.us/i/mainboard6812xxx009f.jpg/

tone chaser · Post by **tone chaser** » Mon Sep 21, 2009 3:55 pm

If it blows it will be ok buddy. you have given it your all. Im internally greatful for you persist to help me. Thank you. alittile smoke no problem. I will send you completed photos in a jiffy........Thanks you hahaha

Metropoulos Forum

Installing Two Sozo 100uf royals on the cap Board BB kit????

Installing Two Sozo 100uf royals on the cap Board BB kit????

Re: Installing Two Sozo 100uf royals on the cap Board BB kit????

Re: Installing Two Sozo 100uf royals on the cap Board BB kit????

Re: Installing Two Sozo 100uf royals on the cap Board BB kit????

Re: Installing Two Sozo 100uf royals on the cap Board BB kit????

Re: Installing Two Sozo 100uf royals on the cap Board BB kit????