Blown HT fuse after MV attempt

cobrakaiusa · Post by **cobrakaiusa** » Fri Oct 12, 2007 1:19 am

Ok here's my story.

I'm messing around trying to put in a PPIMV. I did the Novo-stah one.

I power up and nothing.

I check fuses and HT fuse is cooked.

So I replace fuse, remove MV and put circuit back to how it was originally, check connections and fire it back up.

Now I have a nice loud hum but no volume.Fuse is still intact.

Im looking at power tubes and they look more blue than before. Maybe it is my mind playing tricks?

Any ideas/suggestions?

Thanks in advance.

wdelaney72 · Post by **wdelaney72** » Fri Oct 12, 2007 8:53 am

Do or die, CobraKai...

Post some pictures.

cobrakaiusa · Post by **cobrakaiusa** » Fri Oct 12, 2007 2:43 pm

no problem.

novosibir · Post by **novosibir** » Fri Oct 12, 2007 5:36 pm

cobrakaiusa wrote:Any ideas/suggestions?

Yes!

Post some pixs, that we can see, what you've done wrong by accident

Larry

cobrakaiusa · Post by **cobrakaiusa** » Tue Oct 16, 2007 4:17 pm

Fixed! I re-did solder and I have sound but now have new problem.That I will start new post with. No volume on Volume II.

Metropoulos Forum

Blown HT fuse after MV attempt

Blown HT fuse after MV attempt

Re: Blown HT fuse after MV attempt