50 watt chassis in metro store

Kapo_Polenton · Post by **Kapo_Polenton** » Thu Oct 11, 2007 9:27 pm

Gents,

I have been having problems with my Weber 6m45p recently and looking in it, its a total spaghetti mess. Everything is way too tight in there..small chassis. I want to rewire it neatly and use one of George's PTP kits. Can someone tell me what the dimensions are of the 50 watt chassis? I know my laney 50 watt seems to be inside a 100 watt chassis and i am wondering if I should go with a 100 watt chassis or is the 50 big enough? Would the weber 6m45P essentially be what they call a small head or small box Marshall? It was a bloody pain to work in there and i'd like something neat that i can easily make changes too moving forward.

Thanks..

Flames1950 · Post by **Flames1950** » Fri Oct 12, 2007 12:26 am

The Weber chassis and George's 50-watt chassis will be pretty much the same size. They are cramped as hell, it takes some careful laying out to keep it neat.

Kapo_Polenton · Post by **Kapo_Polenton** » Fri Oct 12, 2007 9:20 am

Thanks for the info. Are they deeper at all? It looks as if there is more room between the tube sockets and the board... I guess I might want to consider the PTP board that is PCB board replacement size then. Also, if not that much more room then hell, I should take the money for the chassis and faceplates and drop it on a mercury output tranny!

neikeel · Post by **neikeel** » Fri Oct 12, 2007 3:09 pm

If you want authentic plexi 50 watt tones a Marstran 139 tranny is perfect.

However, if you want hotter then the slightly tweaked MM OT is a better bet IMO