50 watt plexi kit instructions

Post by **VelvetGeorge** » Wed Nov 07, 2007 5:58 pm

Here is the complete instructions for the 50 watt kit:

http://www.savefile.com/files/1180856" onclick="window.open(this.href);return false;

Also on Metro server:

http://www.metroamp.com/downloads/50_WA ... CTIONS.pdf" onclick="window.open(this.href);return false;

EDIT: page numbers added.

41 pages in a 21Mb pdf file.

Please use this thread to post any suggestions, mistakes, typos etc.

Enjoy!

george

EDIT: I have found a few typos in there. One funny one: in step 10, the OT tap color is spelled "gray".

Also, on the bass specs board layout, the V1 cathode cap is listed as 220uf. I have updated this to 330uf.

rockstah · Post by **rockstah** » Wed Nov 07, 2007 6:53 pm

well done on the instructions George!

Mark

AnotherBrother · Post by **AnotherBrother** » Wed Nov 07, 2007 8:44 pm

Hell, I enjoyed reading that and I don't even have a kit!

Post by **VelvetGeorge** » Wed Nov 07, 2007 10:46 pm

Thanks men. I tried to raise the bar again. I hope the large file size won't keep these out of people's hands.
To do it right I had to remind myself that megabytes are cheap these days and that the better images and detail are well worth it.

Of course, anyone who wants these and doesn't have a fast internet connection can email us your mailing address. We'll mail you a CD.

George

mwm523 · Post by **mwm523** » Wed Nov 07, 2007 10:50 pm

George, these instructions are absolutely top notch. The level of detail provided is amazing, and I think you've succeeded in limiting the number of tech support requests.

I can't wait to get started on my build!

myfoot · Post by **myfoot** » Thu Nov 08, 2007 4:17 am

+1 I had a quick look at them last night and was amazed. I enjoyed the tech notes ; explains things for us not so technically inclined

bartak · Post by **bartak** » Thu Nov 08, 2007 10:05 am

Numbering the pages would be helpful. I printed the instructions out and numbered them by hand to keep things organized. other than that things look top notch. I'm really looking forward to building and hearing my kit. one more thing, does the kit come with a metropoulos head logo? It is a metro after all and the case looks kind of plain with no badge.

Post by **Scumback Speakers** » Thu Nov 08, 2007 10:14 am

Instructions look decent from my end. I'll be clearing the decks (amp build table) for action right after I get my 2nd cup of coffee in me.

50 watt kit showed up on Tuesday, Mercury Magnetics Epi Valve Jr. upgrade yesterday. Looks like I need to go get my 50 watt PT/OT from my buddy Mr. Yates.

NY Chief · Post by **NY Chief** » Thu Nov 08, 2007 11:08 am

Southbay Ampworks wrote: Mercury Magnetics Epi Valve Jr. upgrade .

good luck....

el34on11 · Post by **el34on11** » Thu Nov 08, 2007 11:25 am

Wish I could see them......My ISP SUCKS!!!!!!

...Can't get the download to start....

Derrick

Post by **VelvetGeorge** » Thu Nov 08, 2007 11:26 am

Page numbers added.

Derrick, if you can't get it, email us and we'll mail them to you on CD.

george

el34on11 · Post by **el34on11** » Thu Nov 08, 2007 11:33 am

VelvetGeorge wrote:Page numbers added.

Derrick, if you can't get it, email us and we'll mail them to you on CD.

george

WOW!!!

Thanks George!!!!

Will do.....

Derrick

Freebird · Post by **Freebird** » Thu Nov 08, 2007 2:28 pm

Couldn't be better! Top notch instruction with lots of useful informations.

Thanks George. I sure will also buy a JMP50 kit. The $ hits low against Euro

.

Daniel

yngwie308 · Post by **yngwie308** » Sat Nov 10, 2007 1:53 pm

Absolutely hands down the most complete, detailed, helpful, user friendly, instructions I have ever read in conjunction with an electronic assembly.

yngwie308

LeftyStrat · Post by **LeftyStrat** » Mon Nov 12, 2007 2:47 pm

Wow George,
IMO, you've produced quite a gold nugget in that instruction doc. Honestly, if I found that doc as a printed book, I'd buy it.
It's very well thought out and assembled.
BIG THANKS to you for making it freely available.

Pat