50 watt build no sound
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
50 watt build no sound
ok u guys who no these things like the back of ur hands
just built a 50 watt i have no sound but when i shut the power switch down i get guitar sound for 3 to 4 sec.
if i keep switching power on and off i get sound
marstran 164 trans
classictone ot
the amp came with the 4 lug carling switches i always use the 2 pole switches does it sound like i have the switches wired wrong?
power on and srandby on i get all accurate voltage readings from v1 too v5
thanks mike
just built a 50 watt i have no sound but when i shut the power switch down i get guitar sound for 3 to 4 sec.
if i keep switching power on and off i get sound
marstran 164 trans
classictone ot
the amp came with the 4 lug carling switches i always use the 2 pole switches does it sound like i have the switches wired wrong?
power on and srandby on i get all accurate voltage readings from v1 too v5
thanks mike
mike
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: 50 watt build no sound
Check you impedance
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: 50 watt build no sound
Are all voltage readings normal with the amp out of standby and in normal playing mode? You need to determine if the power supply is wired correctly and you are getitng proper voltages at all points. Be sure to check for proper negative DC bias voltage at pin 5 on both power tube sockets, in standby mode and in playing mode.
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
Re: 50 watt build no sound
ok thanks for replying guys
its a marstran jmp 164 trans
brown to power switch
blue to main fuse
all rest tied off
on other side of trans big black n orange to v5
black n brown to ground and f4 can
two reds to rectifier
i have negative 130s on pin 5 on both v4 n v5
like i said if shut the amp down i have guitar sound for 3 to 4 seconds while its powering down all tubes light up
all reading are correct on v1 thru v5 except pin 5 on v4 n v5
these switches i have never used the power switch is a carling with 4 hook ups
standby has 3 hook ups so dont know if i am wiring them wrong i usually use the 2 wire carling switches witch i ordered
please please help
output trans is a classic tone
choke is a classic tone also
its a marstran jmp 164 trans
brown to power switch
blue to main fuse
all rest tied off
on other side of trans big black n orange to v5
black n brown to ground and f4 can
two reds to rectifier
i have negative 130s on pin 5 on both v4 n v5
like i said if shut the amp down i have guitar sound for 3 to 4 seconds while its powering down all tubes light up
all reading are correct on v1 thru v5 except pin 5 on v4 n v5
these switches i have never used the power switch is a carling with 4 hook ups
standby has 3 hook ups so dont know if i am wiring them wrong i usually use the 2 wire carling switches witch i ordered
please please help
output trans is a classic tone
choke is a classic tone also
mike
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
Re: 50 watt build no sound
danman or anybody else i can send photos via text just send me #in a private message would truly appreciate it !!
metro just keeps kicking me out
metro just keeps kicking me out
mike
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
Re: 50 watt build no sound
Ok so if i dime the ppmv i get very very little guitar sound almost like a am fm radio wether the standby is on or off !!! Shut power down n its loud as a mofo for 3 to 4 seconds ?
mike
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: 50 watt build no sound
Send me some detailed pics
axeman6@msn.com
axeman6@msn.com
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
Re: 50 watt build no sound
I wanna thank all you guys for your help !!!! love all you Marshall maniacs
its working great now
Brian from marstran spent about a total of 6 hrs over the phone diagnosing the problem and got it all figured out his jmp trans is amazing sounding !!!
big thanks to BRIAN !!!! FOR all your help buddy
its working great now
Brian from marstran spent about a total of 6 hrs over the phone diagnosing the problem and got it all figured out his jmp trans is amazing sounding !!!
big thanks to BRIAN !!!! FOR all your help buddy
mike
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: 50 watt build no sound
What was wrong?
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
Re: 50 watt build no sound
i had to go to a 220 bias supply dropping resistor
of all things lol
thanks for all your help guys much appreciated
of all things lol
thanks for all your help guys much appreciated
mike