1987 REISSUE PT

Slightly off Target · Post by **Slightly off Target** » Sun Jun 17, 2007 11:48 am

Any one know where I can find the specs on the stock PT in theese amps or the color codes for the wires?

neikeel · Post by **neikeel** » Mon Jun 18, 2007 4:51 am

Depends what year you mean. Here are the wiring colours for the 164 'stand up type'.

I have a Marstran replacement PT in my '69 and I believe that it is spot on.

The lay down type is also available.

http://marstran.com/Wiring%20Diagrams.htm

Slightly off Target · Post by **Slightly off Target** » Tue Jun 19, 2007 9:35 am

Ah yes very good thanks for the reply if I could figure out this damn power switch I might be done with this thing
Thanks Matt

neikeel · Post by **neikeel** » Tue Jun 19, 2007 10:00 am

What is the problem?

Usually feed from mains->mains fuse->mains switch->common feed primary on PT (usually black). You can use a SPST or a DPST switch with the wires passed through to each side.

The other primary wires go to selector switch with neutral to centre of selector switch.

The standby has two wires (ususally blue) with ac onto each side of DPST switch. The out goes to the diodes.

Metropoulos Forum

1987 REISSUE PT

1987 REISSUE PT

pt