I am building a plexi and using the MM P4550JT-Gt that is recommended for the build.
Question is it has terminals on the back and I want to make sure I am correct with the wiring, so I assume the following:
on one side the terminals read and the = is what i believe it is
5 = 5 volts
0 = ?
322 = 322 volts
0 = CT
322 = 322 volts
other side has the following:
COM = Common - for the High voltage
3.15 = 3.15 volts -filaments
0 = ct
3.15 = 3.15 volts -filaments
Correct?
MM P4550JT-G2 Wiring Question
Moderator: VelvetGeorge
-
- New Member
- Posts: 1
- Joined: Wed Apr 13, 2011 8:43 pm
- Just the numbers in order: 7
-
- Senior Member
- Posts: 203
- Joined: Thu Feb 10, 2011 5:06 am
- Just the numbers in order: 7
Re: MM P4550JT-G2 Wiring Question
You need to state the question differently. What you are asking really does not make sense.