50W opt ..... in a 100W circuit ?

All about iron and copper.

Moderator: VelvetGeorge

Post Reply
awangotango
Senior Member
Posts: 1304
Joined: Sat Jan 21, 2006 9:17 pm
Just the numbers in order: 13492

50W opt ..... in a 100W circuit ?

Post by awangotango » Thu Oct 19, 2006 9:41 pm

I have a MercuryM 50W tranny. Can I substitute this into my '67 marshall superlead amp? If so, any changes needed? filtering, wiring, resistor values etc?
Top
User avatar
novosibir
Senior Member
Posts: 4654
Joined: Tue Nov 22, 2005 2:32 pm
Just the numbers in order: 7
Location: Nuernberg, Germany
Contact:
Contact novosibir

Post by novosibir » Thu Oct 19, 2006 11:11 pm

When you'd run the amp then only with two output tubes - no problem!

Larry
The fault almost always is sitting in front of the amp :wink:

Larry's Website now with included Pix's Gallery
Top
Post Reply

Return to “Transformers and Chokes”