Metropoulos Forum

Posted: **Thu May 29, 2008 7:47 pm**

Hey George how about making a 2204 faceplate to fit your 50w Plexi Chassis? It must use toggle switches instead of rockers. Have gain and master volume instead of two volumes. And it must cover the two unused input jack holes not used in the 2204 circuit.

I know it is not correct for the 2204 but would give fans an option for building a 2204 clone. No need to produce a 2204 chasssis on your part(even though members are begging for them

).

Thanks
Tim

Posted: **Sat May 31, 2008 11:59 pm**

I'd buy some.

Posted: **Tue Jun 17, 2008 4:03 am**

No need to produce a 2204 chasssis on your part(even though members are begging for them Wink ).

The original 2204s were just built in a stock 1987/1959 chassis anyway. They also shared circuit boards just with different parts of the board used. Only the faceplates were different.

Posted: **Tue Jun 17, 2008 4:36 am**

JimmyR wrote:
No need to produce a 2204 chasssis on your part(even though members are begging for them Wink ).

The original 2204s were just built in a stock 1987/1959 chassis anyway. They also shared circuit boards just with different parts of the board used. Only the faceplates were different.

The same with the 2203 ;o)

Metropoulos Forum

2204 faceplate for George's 50w Plexi Chassis

2204 faceplate for George's 50w Plexi Chassis