Ralle Spec

rockstah · Post by **rockstah** » Sun Mar 19, 2006 4:00 pm

Andy i knew you would! infact i have been waitin for you to chime in - i will get some more clips up. not a new cab its the one got a while back here, 1976 straight cab with four 25w 75hz blackbacks in it. i posted pics of it i thought?

Mark

Flames1950 · Post by **Flames1950** » Sun Mar 19, 2006 4:04 pm

Yeah, you did. I thought it had been around long enough to quit referring to it as "new" is all.......

rockstah · Post by **rockstah** » Sun Mar 19, 2006 4:17 pm

now im confused when was it referenced as new?

not by me.

same ole cab

Flames1950 · Post by **Flames1950** » Sun Mar 19, 2006 4:21 pm

Actually it was Mike's posts that made me wonder...he asked if it was your new cab, and then the next posat he says he thought you got those blackbacks just a couple of days ago........so blame him!!

rockstah · Post by **rockstah** » Sun Mar 19, 2006 4:26 pm

MIKE!

mightymike · Post by **mightymike** » Sun Mar 19, 2006 6:27 pm

I was reading at the PP that you got (I thought) a mid 70s cab. I assumed that you just got it. This is the one with the one speaker you just sent to Chris for repair.

Oh well never mind me, I've been sniffing solder all day.

Who's on first?

rockstah · Post by **rockstah** » Sun Mar 19, 2006 8:06 pm

i gotchya mike! i understand now! - yeah i merly bumped the thread cause he said he would post pics of the speaker fix process!

it all makes sense now

Mark

mightymike · Post by **mightymike** » Mon Mar 20, 2006 6:36 pm

Crunchboy · Post by **Crunchboy** » Tue Mar 21, 2006 7:38 pm

Rockstah, I really like your latest clips. I agree that the 2203 clip is real nice for VH. Do you still have the lower filtering though? I hear a little of that creamy fuzzyness that I usually equate to the lower filtering. But then again, I really don't know what I'm talking about. One knock on that tone for VH would be that the lowend has a little too much bark/growl. But still, it sounds real good.

rockstah · Post by **rockstah** » Tue Mar 21, 2006 11:53 pm

Crunchboy,

50u screens
50 mains
64u PI
dual 32u preamp

i hear what yer saying. it does growl more for sure.
Mark

Crunchboy · Post by **Crunchboy** » Wed Mar 22, 2006 9:25 am

Excuse my ignorance. Dual 32 = 64? Is 64 for the PI a stock value?

rockstah · Post by **rockstah** » Wed Mar 22, 2006 12:25 pm

Crunchboy wrote:Excuse my ignorance. Dual 32 = 64? Is 64 for the PI a stock value?

correct 32+32 jumpered to = 64u on PI- no clue if its stock or not