Metropoulos Forum

Hi Guys,

Sometime ago i moded my JTM45 with some of the suggestions on the forum.

I put in a Tube Depo SS rectifier plug. I've decided to go back to the tube rectifier. While looking inside i noticed and remembered changing the resistor on Pin8 of V4 & V5, i think i did this for the plug in rectifier. I can't find a post that suggested it on the forum to verify. Any ideas?

Thank you

Ben

The only resistor that I know of on pin 8 of your power tubeiass would be the 1ohm resistors used for checking the bias.