2nd build JTM45 / BB cab
Moderator: VelvetGeorge
-
- New Member
- Posts: 40
- Joined: Sat May 08, 2010 12:18 pm
- Just the numbers in order: 7
2nd build JTM45 / BB cab
Hey guys.
I started my second build recently. Any comments, suggestions, ideas, are all welcome especially if you see a mistake!
I got the chassis and faceplates from George, transformers are Heyboer Metro spec and a Mercury choke. Most of the components came from Valvestorm. My Sozo vintage caps are on the way, and the turret board and fuse holder came from Brian H. Tubes from Dougs Tubes and a few odds and ends from Mojo and Amplified parts. Oh and a Bluesbreaker cab from Jeff Swanson should be here in a few weeks.
2012-06-06_22-55-02_137 copy by joemazz33, on Flickr
2012-06-11_22-47-01_341 by joemazz33, on Flickr
2012-06-11_22-47-38_461 by joemazz33, on Flickr
2012-06-13_22-52-05_610 by joemazz33, on Flickr
2012-06-13_22-54-53_727 by joemazz33, on Flickr
2012-06-14_18-55-30_412 by joemazz33, on Flickr
2012-06-17_14-17-51_341 by joemazz33, on Flickr
I decided to connect my wires on top of the turret board for easier troubleshooting just in case i run into a problems...
2012-06-17_20-29-53_47 by joemazz33, on Flickr
2012-06-21_19-48-39_36 by joemazz33, on Flickr
2012-06-21_19-49-09_184 by joemazz33, on Flickr
2012-06-21_19-49-30_600 by joemazz33, on Flickr
2012-06-21_19-50-12_832 by joemazz33, on Flickr
2012-06-21_19-51-08_497 by joemazz33, on Flickr
2012-06-21_19-51-43_129 by joemazz33, on Flickr
I started my second build recently. Any comments, suggestions, ideas, are all welcome especially if you see a mistake!
I got the chassis and faceplates from George, transformers are Heyboer Metro spec and a Mercury choke. Most of the components came from Valvestorm. My Sozo vintage caps are on the way, and the turret board and fuse holder came from Brian H. Tubes from Dougs Tubes and a few odds and ends from Mojo and Amplified parts. Oh and a Bluesbreaker cab from Jeff Swanson should be here in a few weeks.
2012-06-06_22-55-02_137 copy by joemazz33, on Flickr
2012-06-11_22-47-01_341 by joemazz33, on Flickr
2012-06-11_22-47-38_461 by joemazz33, on Flickr
2012-06-13_22-52-05_610 by joemazz33, on Flickr
2012-06-13_22-54-53_727 by joemazz33, on Flickr
2012-06-14_18-55-30_412 by joemazz33, on Flickr
2012-06-17_14-17-51_341 by joemazz33, on Flickr
I decided to connect my wires on top of the turret board for easier troubleshooting just in case i run into a problems...
2012-06-17_20-29-53_47 by joemazz33, on Flickr
2012-06-21_19-48-39_36 by joemazz33, on Flickr
2012-06-21_19-49-09_184 by joemazz33, on Flickr
2012-06-21_19-49-30_600 by joemazz33, on Flickr
2012-06-21_19-50-12_832 by joemazz33, on Flickr
2012-06-21_19-51-08_497 by joemazz33, on Flickr
2012-06-21_19-51-43_129 by joemazz33, on Flickr
Last edited by JoeM on Wed Jul 11, 2012 11:41 pm, edited 1 time in total.
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
-
- New Member
- Posts: 40
- Joined: Sat May 08, 2010 12:18 pm
- Just the numbers in order: 7
Re: 2nd build JTM45 BB
A little more progress! Soldering job not as neat as i wanted. The bias pot was a pain in the ass!
2012-06-25_17-12-43_812 by joemazz33, on Flickr
2012-06-25_17-12-43_812 by joemazz33, on Flickr
-
- New Member
- Posts: 40
- Joined: Sat May 08, 2010 12:18 pm
- Just the numbers in order: 7
Re: 2nd build JTM45 BB
Finished up the wiring today. Startup went smooth and the amp sounds awesome! I have a new favorite amp! Getting two new scumbacks on friday and my swanson cab should be here really soon....cant wait to take this thing out to play!
2012-06-27_15-55-09_804 by joemazz33, on Flickr
2012-06-27_15-55-09_804 by joemazz33, on Flickr
-
- Senior Member
- Posts: 1178
- Joined: Wed Mar 03, 2010 11:47 pm
- Just the numbers in order: 7
- Location: U.S.A.
- Contact:
Re: 2nd build JTM45 BB
nice amp build, i just got done building a jtm45 out of parts.....its my new favorite amp.....
"purple power rules"
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: 2nd build JTM45 BB
Yes I thought that - seems to be missing the trem board and tubeaxeman wrote:BB?
Neil
-
- Senior Member
- Posts: 512
- Joined: Sat Aug 20, 2011 4:24 am
- Just the numbers in order: 7
-
- Senior Member
- Posts: 58
- Joined: Mon Feb 18, 2008 11:07 am
- Location: Charlotte, NC
- Contact:
Re: 2nd build JTM45 BB
Nice Build, what value of bright cap are you using on the volume control?
Life's too short for bad tone!
-
- New Member
- Posts: 40
- Joined: Sat May 08, 2010 12:18 pm
- Just the numbers in order: 7
Re: 2nd build JTM45 BB
Reeltarded wrote:Still rawkin'!
Nice work.
Thanks!
-
- New Member
- Posts: 40
- Joined: Sat May 08, 2010 12:18 pm
- Just the numbers in order: 7
Re: 2nd build JTM45 BB
toneking wrote:Nice Build, what value of bright cap are you using on the volume control?
Thanks...i originally had the 500pf cap that was spec'd in the directions, but changed it up and settled on 100Pf
-
- New Member
- Posts: 40
- Joined: Sat May 08, 2010 12:18 pm
- Just the numbers in order: 7
Re: 2nd build JTM45 BB
neikeel wrote:Yes I thought that - seems to be missing the trem board and tubeaxeman wrote:BB?
Yeah i guess i should have called the thread JTM45 Combo instead! Had the Blues breaker cab on my mind when i made the first post. I never intended to put the trem circuit in
- axeman
- Senior Member
- Posts: 2464
- Joined: Wed Apr 02, 2008 1:21 pm
- Just the numbers in order: 7
- Location: Los Angeles
- Contact:
Re: 2nd build JTM45 / BB cab
Good job anyways. Were didyou bet the bias caps?
-
- New Member
- Posts: 40
- Joined: Sat May 08, 2010 12:18 pm
- Just the numbers in order: 7
Re: 2nd build JTM45 / BB cab
axeman wrote:Good job anyways. Were didyou bet the bias caps?
Valvestorm
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England