Page 1 of 1

My First Build... what fun and what tone!!!

Posted: Thu Oct 21, 2010 11:58 pm
by TheOuvs
This is my first attempt at building an amp, I have done one Montey Allums pedal mod but nothing like this. I can't take all the credit though... I would like to thank everyone at Metro Amp, without them and their kind and always generous help (and sometimes hands on, solder joints can be a bitch) it wouldn't have been possible. George runs a wonderful company and is a class act!

Image

Image

Image

Image

Image

By the way, I took this amp into my local Guitar Center and the assistant manager, who is a good friend was blown away by this amp. The tone on this thing is out of sight!!

Also, thanks to the many people on this forum that helped in ways you'll never know about!!! I can't wait to do this again.

Re: My First Build... what fun and what tone!!!

Posted: Fri Oct 22, 2010 8:31 pm
by TheOuvs
Ok, I've been enjoying my new amp for about a day now and every once in awhile I get this loud hiss that comes and goes. It doesn't seem to affect the tone, but you just have this hiss sound over it. If I turn the stand by off it goes away again for awhile. It very intermittent.

Any Ideas???

Re: My First Build... what fun and what tone!!!

Posted: Wed Oct 27, 2010 11:57 am
by neikeel
Intermittent hiss maybe a dry joint on the B+ (power supply rail) - those grey MO 8k2 and 10k droppers although the hiss from a vintage amp with this problem is usually from the old carbon comps that were used so not necessarily the issue in yours. Nevertheless an intermittent problem like this on a newly built amp that otherwise works well will be a cold joint where you are not always getting signal passing properly, and occasionally getting a higher resistance to (or in some circumstances complete loss of) the electronic signal.

Usual method is to go over every solder joint and inspect it carefully, if any doubt reflow the joint with the soldering iron on the correct temperature and make sure the solder flows into the joint evenly.

A hiss or whooshing noise maybe a poor preamp tube.

Re: My First Build... what fun and what tone!!!

Posted: Thu Oct 28, 2010 9:50 am
by TheOuvs
Thanks Neil,

I have checks the solder joints and a couple were suspect, re-flowed them and am now testing. We'll know soon.

Thanks,
Kris

Re: My First Build... what fun and what tone!!!

Posted: Wed Nov 03, 2010 7:30 am
by TheOuvs
All is well... hum is gone and the amp sounds great. Been playing for days and no signs of the hum returning.

Re: My First Build... what fun and what tone!!!

Posted: Thu Nov 04, 2010 2:08 pm
by j.christopher
where did you get those cool blue tube cans?

Re: My First Build... what fun and what tone!!!

Posted: Thu Nov 04, 2010 4:15 pm
by spaceace76
j.christopher wrote:where did you get those cool blue tube cans?
metro sold preamp tube covers in various colors before they began reformatting the store

Re: My First Build... what fun and what tone!!!

Posted: Fri Nov 05, 2010 4:06 am
by Drawbarbarian
j.christopher wrote:where did you get those cool blue tube cans?

Check this link out, I recently found the site. I currently have parts on order from them. I too am a sucker for colored tube shields........


http://www.newoldsounds.com/index.php?m ... ld&x=0&y=0" onclick="window.open(this.href);return false;

Re: My First Build... what fun and what tone!!!

Posted: Sun Nov 07, 2010 2:58 pm
by j.christopher
Drawbarbarian wrote:
j.christopher wrote:where did you get those cool blue tube cans?

Check this link out, I recently found the site. I currently have parts on order from them. I too am a sucker for colored tube shields........


http://www.newoldsounds.com/index.php?m ... ld&x=0&y=0" onclick="window.open(this.href);return false;
great!
I think maybe the res ones!
thanks