Question about casters in 77 marshall cab.....

This is what it sounds like, when cones cry.

Moderators: VelvetGeorge, BUG

Post Reply
redozzman
Senior Member
Posts: 804
Joined: Sat Jan 20, 2007 12:48 am

Question about casters in 77 marshall cab.....

Post by redozzman » Sat Apr 17, 2010 10:29 am

What size is the screw that fits into the caster socket on a 77 cab? My cab has the plastic cups or whatever you call the thing that the caster screws into

User avatar
908ssp
Senior Member
Posts: 2954
Joined: Sun Aug 14, 2005 12:56 pm
Just the numbers in order: 7
Location: Michigan
Contact:

Re: Question about casters in 77 marshall cab.....

Post by 908ssp » Mon Apr 19, 2010 10:32 am

Not sure on the 77 because Marshall changed around, sometimes course threads sometime fine threads. Went from an English thread to a metric thread. You just have to find some screw that fits and take it to a store to compare it if you don't have the tools to measure.
Last edited by 908ssp on Wed Apr 21, 2010 9:51 am, edited 1 time in total.

redozzman
Senior Member
Posts: 804
Joined: Sat Jan 20, 2007 12:48 am

Re: Question about casters in 77 marshall cab.....

Post by redozzman » Tue Apr 20, 2010 10:04 am

Thanks for the reply, I guess I need to take one of the cups off and take it to the hardware store. :wink:

motorhead_6
Senior Member
Posts: 51
Joined: Sat May 15, 2010 11:31 pm
Just the numbers in order: 7

Re: Question about casters in 77 marshall cab.....

Post by motorhead_6 » Wed May 26, 2010 12:57 am

I have some Casters from a couple of cabs I bought in either the very late 70s or very early 80s. If it was the 80s it was probably 80 so they may have been built in the 70s. Would those be the same as the ones you are asking about?

Post Reply